User Tag List
Thanks: 0
Likes: 0
Results 1 to 8 of 8
Thread: Level Up 3.0 Display Blank
-
02-01-2017, 10:41 AM #1
- Join Date
- May 2016
- Location
- Manhattan (Little Apple) Kansas
- Posts
- 1,525
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
Level Up 3.0 Display Blank
Four days ago we installed batteries that have been on a battery tender for the last few months. Today we went out and the level up control display was blank but the back lighting on the display is on but the controller seems to function fine just can't tell what mode it is in. We got it connected and now it home plug into 120 circuit and still no display. It is about 28 degrees out and I don't know if that would affect the display. Any suggestions?
Dennis & Ellie
Current 2017 Newmar Ventana Class A & 1994 Airstream Excella Classic Limited Project
Sold - 310-GK-R Delivered 28 Oct 2016
2016 GMC Denali 1 Ton Diesel SRW Payload 3727LBS B&W Hitch
-
02-01-2017, 11:13 AM #2
- Join Date
- May 2016
- Location
- Manhattan (Little Apple) Kansas
- Posts
- 1,525
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
Called GD and they said to unplug the display and plug it back in and now nothing works and no lights or jack won't move. Niow it's 100% dead.
Dennis & Ellie
Current 2017 Newmar Ventana Class A & 1994 Airstream Excella Classic Limited Project
Sold - 310-GK-R Delivered 28 Oct 2016
2016 GMC Denali 1 Ton Diesel SRW Payload 3727LBS B&W Hitch
-
02-01-2017, 12:02 PM #3
- Join Date
- Dec 2014
- Location
- Fountain Valley, CA
- Posts
- 2,254
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
Try unplugging for a few minutes or longer, if you can, and then try again.
Curtis, Christine, Cole, and Charlotte
2007 Chevrolet Silverado Duramax LBZ, CCLB
2020 Momentum 351M
-
02-01-2017, 12:16 PM #4
- Join Date
- May 2016
- Location
- Manhattan (Little Apple) Kansas
- Posts
- 1,525
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
I tired several times and even brought in the house and warmed it up and nothing except a beep every 5 seconds. Call the dealer and he said that all it needs is re-calibrated and I ask how you do that without a screen display and he just said we do all the time. GD called back and Jerry spent couple minutes trouble shooting and is sending a new unit out next day. He also said how do your calibrate with no screen display.
Dennis & Ellie
Current 2017 Newmar Ventana Class A & 1994 Airstream Excella Classic Limited Project
Sold - 310-GK-R Delivered 28 Oct 2016
2016 GMC Denali 1 Ton Diesel SRW Payload 3727LBS B&W Hitch
-
02-01-2017, 02:27 PM #5
-
02-02-2017, 10:59 AM #6
- Join Date
- May 2016
- Location
- Walthourville, GA which is just outside of Hinesville, GA home of the 3rd Infantry Division
- Posts
- 678
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
-
02-02-2017, 11:16 AM #7
- Join Date
- May 2016
- Location
- Manhattan (Little Apple) Kansas
- Posts
- 1,525
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
We brought the control panel in for several hours then tried again and display was working except the right and rear buttons are flashing. Left for about hour and the screen went blank again. Unplug it and plug back in again and now just beeping and nothing works. Still wanting for UPS to bring the new panel from GD.
Dennis & Ellie
Current 2017 Newmar Ventana Class A & 1994 Airstream Excella Classic Limited Project
Sold - 310-GK-R Delivered 28 Oct 2016
2016 GMC Denali 1 Ton Diesel SRW Payload 3727LBS B&W Hitch
-
05-05-2018, 09:35 AM #8
I am having this same issue. How did you eventually get the problem resolved?
Similar Threads
-
Blank tank flush
By msdevery in forum General DiscussionReplies: 9Last Post: 10-23-2017, 06:24 PM -
lci left front jack failure on display
By fishkiller1 in forum General DiscussionReplies: 3Last Post: 06-25-2017, 08:54 PM -
6 Point leveling display (Quik Level)
By Glazier in forum FrameReplies: 4Last Post: 02-16-2017, 07:03 AM -
Blank tank flush relocation
By GD350M in forum General Tech TopicsReplies: 12Last Post: 12-30-2014, 09:37 AM -
Radio/DVD LED Display
By John & Lisa in forum General DiscussionReplies: 2Last Post: 07-08-2014, 03:55 AM
Water coming from inside the...
Today, 06:18 AM in Plumbing and Water Systems