User Tag List
Thanks: 0
Likes: 0
Results 1 to 2 of 2
Thread: Slide gouging floor.
-
02-03-2017, 12:16 PM #1
- Join Date
- Nov 2016
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Slide gouging floor.
We have a 2014 303RLS Reflection. We we set up in our Campground and put our right slide (dining table and lounge chairs) we noticed a scrape on the floor. How do you adjust the slide so it won't gouge the floor?
Sent from my iPhone using Tapatalk
-
02-03-2017, 12:45 PM #2
It is very difficult to keep this slide from touching the main floor. It is a "light weight" slide and to keep it close to the level of the main floor, they do not use rollers, but only plastic sliders. As the slide comes in, after the balance point, the inside edge drops down and contacts the floor. This is made worse if you have a slide topper pulling the top of the slide in slightly as it rolls up. How do I know this ? . . . had the same problem and went through all the possible fixes with the GDRV and LCI techs at the 2015 Elkhart Rally.
The "fix" is to use slide slickers on the floor at each end of the slide, to protect the floor. http://www.lci1.com/slideout-slicker One caution if you decide to get these, they make two different versions, one with prongs on the underside to grab carpet and one with foam strips for vinyl floor.
RobCate & Rob
2015 Reflection 303RLS
Similar Threads
-
Sllide floor warped and not flush with main floor
By paulandruby in forum General Tech TopicsReplies: 3Last Post: 12-24-2017, 02:30 PM -
Floor gouging- possible slide hardware
By steve gravelle in forum General Tech TopicsReplies: 18Last Post: 10-29-2015, 09:06 AM -
Slide floor above trailer floor
By janmaclean in forum General DiscussionReplies: 12Last Post: 12-05-2014, 04:44 AM -
Slides gouging floor
By gallacher in forum General DiscussionReplies: 15Last Post: 06-20-2014, 10:36 PM -
Slides gouging floor
By gallacher in forum General DiscussionReplies: 0Last Post: 05-13-2014, 08:46 AM
Looks like another big shift in...
Today, 01:14 PM in Tires