User Tag List
Thanks: 0
Likes: 0
Results 1 to 9 of 9
Thread: Furnace out, all of a sudden.
-
03-15-2017, 06:51 AM #1
- Join Date
- Sep 2013
- Location
- Huron Twsp, MI
- Posts
- 983
- Blog Entries
- 2
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Furnace out, all of a sudden.
My furnace stopped working last night, I can verify it was OK during the night but by a.m. there was no heat. I expected my propane had run out so I switched to the other bottle, which I know is full. I turned the tstat up to kick on the heat and nothing happened. I have no purge fan. I verified gas is ok by turning on a stove burner. I should have purge fan so I turned tstat off, counted to 5 and turned back on. Nothing still. I did several variations of lowering and raising the temp setting to no luck. I went to fuse panel, that's looks ok. There are no lights. This is a Suberban furnace. Thanks.
Last edited by TNFSolitude; 03-16-2017 at 10:14 AM. Reason: correction and update
Tom & Nancy
Newport, MI
369RL, #302
[SIGPIC][/SIGPIC]
-
03-15-2017, 10:11 AM #2
- Join Date
- Dec 2014
- Location
- Fountain Valley, CA
- Posts
- 2,254
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
I'm not 100% sure, but I think there's a reset breaker somewhere at the furnace around the control board area.
Curtis, Christine, Cole, and Charlotte
2007 Chevrolet Silverado Duramax LBZ, CCLB
2020 Momentum 351M
-
03-15-2017, 07:01 PM #3
- Join Date
- Sep 2013
- Location
- Huron Twsp, MI
- Posts
- 983
- Blog Entries
- 2
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Thanks, I'll look for that.
tnfsolitudeTom & Nancy
Newport, MI
369RL, #302
[SIGPIC][/SIGPIC]
-
03-16-2017, 08:11 AM #4
- Join Date
- Sep 2013
- Location
- Huron Twsp, MI
- Posts
- 983
- Blog Entries
- 2
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Nope, no reset switch. Just a rocker on/off switch. I also crawled through the storage area and looked at the wiring going to furnace checking to see if there was an inline fuse, found none. Does anyone know if the circuit board has a diode light of any kind indicating there is power?
Tom & Nancy
Newport, MI
369RL, #302
[SIGPIC][/SIGPIC]
-
03-16-2017, 08:32 AM #5
- Join Date
- Jan 2017
- Location
- Vancouver Canada
- Posts
- 10
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
We had a similar problem and I was able to resolve it by resetting the thermostat. Try holding the thermostat selection button (at bottom of thermostat) depressed for 30 seconds. This reset worked for us, and hopefully it will work for you.
Jim & Denise
2017 Solitude 310 GK
2016 Chevy Silverado SRW Duramax 3500 HD LTZ
-
03-16-2017, 10:16 AM #6
- Join Date
- Sep 2013
- Location
- Huron Twsp, MI
- Posts
- 983
- Blog Entries
- 2
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
-
03-16-2017, 11:18 AM #7
Does the thermostat give you any error codes?
2016 Grand Design Reflection 337RLS
-
03-16-2017, 11:23 AM #8
- Join Date
- Jan 2017
- Location
- Vancouver Canada
- Posts
- 10
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Oh, ok. Our Solitude build date 12/17 has the axcell thermostat. Wish you good luck and all the best.
Jim & Denise
2017 Solitude 310 GK
2016 Chevy Silverado SRW Duramax 3500 HD LTZ
-
03-16-2017, 01:48 PM #9
- Join Date
- Aug 2016
- Location
- Houston Texas
- Posts
- 74
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
the only time our heat quit working it was due to a control board failure.
Same symptoms : Stopped working all of a sudden , No Fan .....
New board and all is good.
There should be an LED light on the board.2015 313RLTS
2006 F250 6.0 FX4 minus the Ford parts
Similar Threads
-
Question for all you dry campers out there.
By gordofuchs in forum General DiscussionReplies: 4Last Post: 10-10-2015, 12:25 AM -
Added Slide-out topper to door side slide-out
By ACDW-Ottawa in forum ExteriorReplies: 2Last Post: 08-13-2015, 06:11 AM -
All of a sudden new postings about many GD customers with problems
By Mr Lucky in forum General DiscussionReplies: 19Last Post: 06-28-2014, 08:15 PM
Re-pack bearings necessary?
Yesterday, 09:29 PM in Axles, Brakes, and Suspension