3.0 Ground Control Linc Remote setup problem

[whitetail300]

I purchased the Linc Remote that is supposed to sync to the Ground Control 3.0 and be able to control the leveling system on my 5th wheel trailer. I can't firgure out how to sync the remote to the ground control. Supposedly there is a "multi function board" in the rig, but I can't find it. Not sure what to do for here on.
If anyone has any dealings with this I would appreciate your help.
I own the Reflections 29RS 5th wheel

[lawdes]

Your rig won't have the multifunction computer on board but if you have the Levelup 3.0 in a recent build it will work for that. Check the controller in the front basement for the short black antenna wire. It's a two step process on the remote and also on the keypad in the basement. Go to LCI website and download the Aftermarket Manual for levelup 3.0. ( make sure it's the "Aftermarket" version. It will have the directions...not very clear but they will get you there. I got the remote and it does work. The screen is not quite the same as on your wired control screen but it does work. Good luck!

Sorry...meant Ground Control 3.0 instead of Levelup 3.0....getting late..

[Jerryr]

Here's the manual. Go to page 13-14
https://www.lci1.com/assets/content/...ket_Manual.pdf

Jerry

[lawdes]

Thanks Jerry, haven't figured out how to do links and photos...still waiting for telegraph wires to be strung to my place...��

[whitetail300]

Great. I did as you suggested and it works. Thank you!!!