Solitude 375

[Val and Denis]

Rear Slide out tray dimension for Solitude 375. HxWxD Anyone? Thanks

[Henban]

Outside dimensions: 90" x 52" x 6 1/2" (this includes tray and frame)

[Val and Denis]

Thanks for that. Can you also let me know the height of the opening for the slide out tray? 36"? I am trying to determine how tall an item I can put there.
Thanks again!
Denis

[Henban]

No problem!
The actual opening is 53" x 32"
The drawer sticks up over the bottom of the opening by 5 1/2" so that's now 26 1/2"
With the drawer open the distance from the top of the opening to the floor of the drawer is 30"
As a side note the drawer slides out past the opening 50"

[VannChan]

Do you know what the weight limit is of the tray?

[Henban]

800 lbs. There is no sticker or markings that I can see on it but I believe it is the MORryde CTG60-5290W.

[VannChan]

Thanks for the info nd goo luck for fulltiming.

[[email protected]]

Can you please answer a couple of questions for me about the basements behind and into the pass through for your solitude. I am trying to put a 12 and a 1/2 foot kayak in the back, would you know if this will fit? The grand design homepage shows a kayak being suspended from the top of the storage into the side to side passed through. I am just wondering what the total overall length is from the back to the very farthest point forward.
thanks for any help

[Henban]

It's 12' 4" back to front.
About 7' 6" into the storage from the rear is a step-up at the end of the tray. The clearance at the step-up to the top of storage is 1' 11".
So, I would say 12' 6" would not fit. Hope that helps.

[[email protected]]

Thanks for the speedy reply