User Tag List
Thanks: 0
Likes: 0
Results 1 to 3 of 3
Thread: Furrion Camera for 2018 327 RST
-
07-23-2018, 02:35 PM #1
- Join Date
- Jul 2018
- Location
- Vernon BC
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Furrion Camera for 2018 327 RST
I installed the Furrion Back-up/Observation camera and found the power is on all the time. Camera works fine but I would like to be able to turn it off. I followed some of the other leads. The camera power is not connected to the rear pot lights or switch. It can't be connected to the marker lights if it's always on (yes the truck was not connected).
Any ideas where that power might be coming from?
Rick
-
07-23-2018, 03:49 PM #2
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,125
- Mentioned
- 191 Post(s)
- Tagged
- 0 Thread(s)
There are many threads on this topic if you use the search function. The power source can vary from model to model, but the universal solution is to fish for the top center clearance light wiring and move the camera camera to that. Then it will just be on when the clearance or running lights are on on the tow vehicle.
RobU.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
-
08-14-2018, 01:43 PM #3
- Join Date
- Jul 2016
- Location
- Snohomish WA
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
My 397TH is connected to the vent fans. I pull that fuse when in storage so the camera is not powered.
Slide actuator failure on 2021...
Today, 06:49 AM in Slide Systems