Furrion Camera for 2018 327 RST

[Richard Allan]

I installed the Furrion Back-up/Observation camera and found the power is on all the time. Camera works fine but I would like to be able to turn it off. I followed some of the other leads. The camera power is not connected to the rear pot lights or switch. It can't be connected to the marker lights if it's always on (yes the truck was not connected).

Any ideas where that power might be coming from?


Rick

[Second Chance]

There are many threads on this topic if you use the search function. The power source can vary from model to model, but the universal solution is to fish for the top center clearance light wiring and move the camera camera to that. Then it will just be on when the clearance or running lights are on on the tow vehicle.

Rob

[imacowboy]

My 397TH is connected to the vent fans. I pull that fuse when in storage so the camera is not powered.