I took our trailer out on a weekend trip and after getting located and leveled in the camp site started to extend the dinette slide. It moved about 2 inches then stopped. I went to the controller and had a flashing error code for a battery dropout on motor #2 . That was one green light blink with 2 blinks from the red. Fairly confident I read the fault location code correctly. I reset the controller and then the slide functioned normally.

I'm looking for another owner that might have had a similar issue and what the underlying problem was. I'd like to get in front of any potential issues and solve it before it becomes a hard fail and I end up with a stuck slide. The controller is a Lippert Dual Motor Synchronous Velocity Slide Controller.

Thanks in advance.