Adding TV to storage compartment

[SGTABN82]

8) I just ordered my Monoprice 5921 bracket !!!! I should be able to start this project this weekend!! Thanks again Dave!!!

[Bret and Linda]

Got it! Thanks Dave for the photo's and parts list. This definitely helps, will be ordering the bracket today!

Bret

[D Hardison]

You are all welcome, and ditto on the forum it is nice to give and receive help.

Cheers everyone, we are off to a little 4 day'er to sort out brain cob webs.

Dave

[Navigator]

Just ran across this thread. Thanks Dave for the photos and detailed description of how you installed the TV. We've been talking about installing one also and your instructions will be a big help!

Kathy

[Sandi]

Well we appreciated all your info on mounting the tv. Being leery of all those lines on the front side of the bulkhead I opted for a 3/4 " piece of plywood 24" x 14" to fasten the mount to. I drilled through the plywood into the compartment that stores the third propane tank and then to the far left of the plywood . I used 1/4" carriage bolts with lock nuts and washers in the front compartment. This easily cleared all the lines and gave me two studs sticking out in the front. I plan to mount angle brackets to them to attach my tool set to. Allen