New 303 has landed

[New Tamper]

I somehow got tagged on your post about a slide topper for your 2970, I assume your curb side slide. I put a large detailed post on this. I have a 2017 2950 RL which is the same thing as the 2970, I don't know if you can search 2950 slide topper install, but my name on the GD Forum is New Tamper. I will attach the pictures I put on the post. It's really not that big of a deal, and mine works great. Good luck!

[butch50]

Thanks could you send me pics?

Steve,

I got your PM but for some reason I can't post pictures so here are some of the slideout topper









Hope this helps

[klenger]

Am I reading the pin weight correctly? 4200 lbs for an unloaded 303?

[Cate&Rob]

Am I reading the pin weight correctly? 4200 lbs for an unloaded 303?

This is a rather “wandering” thread . Don’t know where the 4200 number came from. The pin weight for an unloaded 303 is about 1800 lbs.

Rob

[Canadiansteelman]

Jim,

I hope I attached the files correctly for you to see. The first ones show the topper over the dinette and you can see the brackets are a little taller and hold the topper up higher the the last ones. You can also see how they had to move the slide topper back so it would work with the awning.

I'm giving it a try now.

Attachment 10182

Attachment 10183

Attachment 10184

Attachment 10185

Attachment 10186

As you can see from the last post that the slide topper attaches to the side wall where the one over the dinette attaches to the edge of the slideout. I'm hopping that this doesn't put any more pressure on this area. I asked and they told me they have done this on many other brands also.

So anyway here you go.

ON EDIT: I looked again and the slide topper does fasten on the side of the wall that I thought mounted on the slide edge. So there is no problem with stress on the slide.

Did they install Dometic slide toppers on your 303? I am looking at putting a set on my 303.

[Robhanshew]

Thanks for the pictures