User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
Thread: Night stand removal 2017 337RLS
-
01-21-2017, 08:50 PM #1
- Join Date
- Jan 2017
- Location
- Southern California
- Posts
- 48
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Night stand removal 2017 337RLS
I want to remove the night stands on my 2017 Reflection 337RLS. Does anyone know how to remove them without damaging the walls? I don't see any visible screws or nails.
Thanks in advance.Mike & Jaimie :cool:
2005 Chevrolet 2500HD LB 4x4 Durmax
2017 Reflection 337RLS, Build Date 11/2016
2005 Crossroads Cruiser 29RE (2006-2017)
2000 Skyline Nomad 2585 Bunkhouse (2003-2006)
-
01-30-2017, 12:54 PM #2
- Join Date
- Jan 2017
- Location
- Southern California
- Posts
- 48
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Ok. So I've completed our first mod. After contacting GD support I was told to remove the front paneling then I had access to the cleat screws. Easy to remove and took about 15 minutes. Once I removed the night stands I removed the bed support plywood and installed new maple plywood and cut it a bit larger in order to accommodate the king bed. Sorry but I forgot to take any photos.
Mike & Jaimie :cool:
2005 Chevrolet 2500HD LB 4x4 Durmax
2017 Reflection 337RLS, Build Date 11/2016
2005 Crossroads Cruiser 29RE (2006-2017)
2000 Skyline Nomad 2585 Bunkhouse (2003-2006)
-
01-30-2017, 06:23 PM #3
- Join Date
- Nov 2016
- Location
- Florida
- Posts
- 2,822
- Mentioned
- 30 Post(s)
- Tagged
- 0 Thread(s)
Interesting posting. I'm looking at possibly purchasing a 2017 337 and I can't find one locally with factory King bed. Your posting gives me hope.
Question 1, "told to remove front paneling". Is that the paneling on the front of the night stands? If so do they just pull off and if not how are they attached?
Question 2, what size a King bed did you install? RV King or Standard King?Jerry & Linda
Emma & Abby our Mini Golden Doodles & JR our Amazon Parrot
2017 Reflection 337RLS, Build Date 01/2017, Titan Disk Brakes, Goodyear G614s 235/85/16 G Rated tires
2022 F-450 King Ranch Ultimate, 4,868 lb Payload, Bedrug Bedliner, Andersen Ultimate II Aluminum 5th wheel hitch
http://visitedstatesmap.com/image/FLGANCSCsm.jpg
-
01-30-2017, 10:42 PM #4
- Join Date
- Jan 2017
- Location
- Southern California
- Posts
- 48
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
The veneer is just pin nailed in. I used a putty knife and pried the molding strip off then pried the panel away. Once it's off I had easy access to the mounting screws. All in all it took about 15 minutes to remove both night stands.
Since we are full timers we put in a Cal King 72"x84". It's longer than RV King (84" compared to 80"). This means we will need to lift the mattress and lay it on the dresser when the slide is brought in. It is nice having the full Cal King but it does limit the walk around space on each side. Making he bed is a bit of a challenge but IMHO well worth the trade off.Last edited by Mrgrumpy007; 01-30-2017 at 10:46 PM.
Mike & Jaimie :cool:
2005 Chevrolet 2500HD LB 4x4 Durmax
2017 Reflection 337RLS, Build Date 11/2016
2005 Crossroads Cruiser 29RE (2006-2017)
2000 Skyline Nomad 2585 Bunkhouse (2003-2006)
Similar Threads
-
DIY Day/Night Roller Shades in Reflection 337RLS
By MJBROWN in forum Mods and DIYReplies: 4Last Post: 04-18-2017, 05:46 AM -
King Pin Stand
By pokerloser in forum FrameReplies: 6Last Post: 01-22-2017, 05:30 PM -
Night stand removal
By Mrgrumpy007 in forum General DiscussionReplies: 0Last Post: 01-21-2017, 08:50 PM -
Finish on kitchen island doesn't stand up to water
By Second Chance in forum General Tech TopicsReplies: 25Last Post: 05-01-2016, 09:48 PM -
Signed the papers and spent our first night in Reflection 303 RLS last night!
By Finally! in forum Welcome Mat | New Member IntroductionsReplies: 4Last Post: 09-06-2014, 07:39 PM
TCL TV turns on by itself after...
Today, 08:03 PM in Electronics