User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
-
12-20-2017, 09:51 PM #1
- Join Date
- Sep 2016
- Location
- Austin Tx
- Posts
- 95
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
397TH Front black tank not draining until the front of rig is raised to max height
I just got my rig back from warranty and one issue was we had to raise the front of the rig to max height to get the black tank to drain. The dealer looked at it and made a suggestion on tank adjustment, however GD denied the warranty claim. Brought it home, put 30 gals water in the blank tank, pulled the lever and nothing. Raised the front of the rig and it started draining. Anyone else seeing this?
Sent from my iPad using Tapatalk
-
12-21-2017, 02:18 AM #2
Typically tanks are designed to drain when the camper is level. How big is your black tank, they really should be full when dumping to allow enough head pressure to ensure proper draining. With 30 gallons of water I would expect something to come out when you try to dump it. Curious what the dealer was going to try to do that GD wouldn't approve.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
12-21-2017, 06:54 AM #3
Your black tank drain is going to be in the end of the tank, something like the attached picture from a previous post. Gate valve in the top center of the picture. It should drain all but the last gallon or two with the RV/tank level. There is something blocking your gate valve . . . I would guess that this might be the plastic disc created when they drilled the drain or vent holes in the top of the tank. You might be able to dislodge this with one of the back flush drain attachments or by leaving the black tank valve open and then opening both grey tank valves at the same time, with full grey tanks.
RobCate & Rob
2015 Reflection 303RLS
-
12-21-2017, 08:42 AM #4
- Join Date
- Sep 2016
- Location
- Austin Tx
- Posts
- 95
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
The paper work only says they wanted to remove underbelly, remove/reposition tank which tells me it was installed at a bit of forward angle. The crazy part is they did approve replacing both black gate valves so they were already in the area.
Sent from my iPhone using Tapatalk
Similar Threads
-
Another Black Tank Falls Out of Rig - Inspection, Modifications and Reinforcements?
By TucsonJim in forum Mods and DIYReplies: 27Last Post: 11-19-2020, 07:38 AM -
Something I have not thought of....until now!!
By Likes to tow in forum General DiscussionReplies: 7Last Post: 08-16-2017, 07:03 AM -
Measuring hitched rig height -- I'm not getting inconsistent results
By jkwilson in forum General DiscussionReplies: 5Last Post: 08-11-2017, 01:51 PM -
Black Water Tank Not Draining on my new 369RL
By Laura and Barry in forum General DiscussionReplies: 5Last Post: 07-23-2015, 09:29 AM -
Raised Table Legs
By Toddly in forum Mods and DIYReplies: 8Last Post: 12-08-2014, 05:39 PM
Freeze Concern
Today, 05:27 PM in General Discussion