User Tag List
Thanks: 0
Likes: 0
Results 1 to 2 of 2
Thread: Sleep number bed in 297RSTS.
-
01-28-2018, 07:12 PM #1
- Join Date
- Aug 2017
- Posts
- 627
- Mentioned
- 10 Post(s)
- Tagged
- 0 Thread(s)
Sleep number bed in 297RSTS.
I received the following message from badam12, but was unable to reply because the account is out of message space, so I am posting it here.
Originally Posted by badam12
The radius bed has, well ... a radius, cut out of the corners at the foot end of the bed. In some RV with very tight bedrooms, the radius helps get around the bed. We have the standard queen (non-radius) and have no problems getting around. The mattress that came in our 297 did not have the radius cutouts either.
The wiring in the 297 is a bit of a challenge in the bedroom. There are outlets on each side of the headboard, but they are high, and using them will leave exposed wiring to the pump. It's not dangerous, but not pretty either. We put the pump in the passenger's side wardrobe and cut a hold through the wardrobe wall to the bed platform for the hoses. I installed a 120 vac outlet on the floor of each wardrobe for the sleep number bed and electric blanket. That's not a simple task, but I made very extensive wiring modifications on mine, including the additional outlets.
What you can do for power for the pump is to drill a hole through the bed platform to the pass-through storage in the right place and plug into one of the outlets in the pass-thru. If you do this, measure 3 times before drilling, and start with a small hole first so that you are sure where it will come through.
Best of luck to you. Write back with any further questions.
-
01-28-2018, 07:52 PM #2
- Join Date
- Jul 2017
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Great. Thanks for the reply. - Bryan
Similar Threads
-
Sleep Number r5 bed - Anybody have One?
By joesmainship in forum InteriorReplies: 4Last Post: 10-31-2017, 10:24 PM -
Which Sleep Number Bed?
By KStrail in forum General DiscussionReplies: 5Last Post: 04-13-2017, 05:34 PM -
Ordered a Sleep Number Bed-Do I need to cut 2 1" holes.
By Go Dawgs in forum General DiscussionReplies: 11Last Post: 02-28-2017, 07:16 AM -
Sleep number
By game warden in forum General DiscussionReplies: 4Last Post: 01-01-2016, 06:01 PM -
Sleep Number Bed
By jmdkelley in forum InteriorReplies: 2Last Post: 04-06-2014, 05:36 PM
Hub Savers - Thoughts on this new...
Today, 09:39 PM in Axles, Brakes, and Suspension