User Tag List
Likes: 0
Results 31 to 40 of 40
Thread: Is Curt a good choice?
-
06-14-2018, 07:10 AM #31
- Join Date
- May 2018
- Location
- Giles County, TN
- Posts
- 97
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks Cate & Rob, you are correct that I'm not planning on using a slider since (at least in theory) I should have clearance using the turning point pin box. I'll check out the thread you referenced.
Thank you Bob, good to know that you are happy with the Curt.Mike, Linda, and Shady (terrier mix rescue)
Reflection 150 230 RL with free standing dinette (swapped location of the dinette and the recliners)
2020 GMC 3500 Denali
B&W Companion Hitch and Turning Point Pin Box locked out
-
06-14-2018, 07:47 AM #32
- Join Date
- Apr 2017
- Location
- Central Oregon
- Posts
- 573
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I have a Pro series 20K Reese 5th wheel hitch. I had a 16K before that. I also have a Reese Sidewinder pin box on my Solitude. I have been using this setup for about 3K miles. I ordered the custom wedge that was made to fit my hitch. It is a much better fit than the universal wedge that comes with the Pin box. It works great. Love this setup. One other benny you will find with the turning point pin box is, because the pivot point is moved 22” to the rear, the trailer tracks better.
Randy & Sharon (Went full time April 14th 2017)
2016 Ram CC SB Outdoorsman 4x4 CTD
Michelin 295/70R18
Fold-A-Cover G4 tonneau,
Dee Zee truck bed mat,
Dee Zee tailgate assist,
Dodge Ram 4x4 Steering Gear Box Brace
Fumoto oil drain valve,
Husky floor liners,
WeatherTech No Drill Mud Flaps,
Firestone Ride-Rite Suspension Kit
Reece Pro Series 20K lb 5th wheel hitch
2018 Solitude 375res
8K lb axles, springs & hubs with Nev-R-Lube bearings
MORryde HD shackle kit with brass bushings & wet bolts
Reece Sidewinder 19K lb pin box.
-
06-14-2018, 08:41 AM #33
- Join Date
- Feb 2018
- Location
- SW Colorado
- Posts
- 2,685
- Mentioned
- 42 Post(s)
- Tagged
- 1 Thread(s)
Just so folks know, Reese has a special wedge for the R20 Titan hitch if needed for the use of a turning point hitch or similar.
2018 Reflection 150 Series 220RK 5th wheel with 6K axle upgrade. B&W 25K OEM Companion, Steadyfast system, 2022 F350 SRW 6.7 King Ranch 8' bed, Trailer reverse lights, rear spare tire holder, storage tube, sumo springs, Victron MultiPlus 12/120/3000, and Solar
-
06-14-2018, 09:05 AM #34
Randy - Interesting observation! I have commented on this same tracking improvement when maneuvering my 5th wheel with the manual slider in the rear position (10" back from the over-the-axle towing position)
I have read "theories" about having the pivot point 22" back maybe causing sway problems similar to a TT . . . but, I expect that the heavier 5th wheel pin weight takes care of this . . . as it probably would if a TT was towed with a 20% tongue weight.
RobCate & Rob
2015 Reflection 303RLS
-
06-14-2018, 11:08 AM #35
- Join Date
- Feb 2014
- Location
- Kerrville, TX RV parks through April 2020
- Posts
- 1,194
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Rob, I would love for you, or anyone with similar setup, to weigh with hitch forward and rearward. We can speculate, but real numbers would be educational.
AKA Steve and Lynne
Storm the Black Lab
Reflection 337 RLS vin 573FR3628E3300393
2008 Dodge Ram 2500 Quad Cab Longbox
6.7 Cummins, 68 RFE transmission
B and W Companion, Air Lifts
-
06-14-2018, 11:47 AM #36
- Join Date
- Apr 2017
- Location
- Central Oregon
- Posts
- 573
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Randy & Sharon (Went full time April 14th 2017)
2016 Ram CC SB Outdoorsman 4x4 CTD
Michelin 295/70R18
Fold-A-Cover G4 tonneau,
Dee Zee truck bed mat,
Dee Zee tailgate assist,
Dodge Ram 4x4 Steering Gear Box Brace
Fumoto oil drain valve,
Husky floor liners,
WeatherTech No Drill Mud Flaps,
Firestone Ride-Rite Suspension Kit
Reece Pro Series 20K lb 5th wheel hitch
2018 Solitude 375res
8K lb axles, springs & hubs with Nev-R-Lube bearings
MORryde HD shackle kit with brass bushings & wet bolts
Reece Sidewinder 19K lb pin box.
-
07-12-2018, 07:39 PM #37
- Join Date
- Jul 2018
- Location
- Ontario Canada
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
For our 295RL our dealer recommended locking out the turning point and go with an auto slide (my F150 is a 5.5 ft. bed)… I already had a Demko however my friend has a Pull Rite and I believe it is a much better unit...
2018 Reflection 295RL 5th Wheel
F150 Sport
-
03-10-2020, 01:47 PM #38
- Join Date
- Dec 2019
- Posts
- 22
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Bert, you just saved me a ton of headache. I'll explain
I went hunting for a truck to pull my TH, and was looking for a specific Transmission and rear axle ratio combo. I found it....but it didn't have the puck system, I didn't realize that meant I couldn't get a B&W 25K companion before I bought the truck.
I was looking at 2 grand to have a company install the puck system so i could buy that hitch. Didn't like the idea of a Curt.
Dude....without knowing it, the Hensley is what i was looking for, and I don't have to do any major mods on the truck and it's a better ride.
I'm stoked...from being frustrated at myself this morning to having a plan that's even better. Thanks man!
-
09-09-2020, 09:46 AM #39
- Join Date
- Dec 2017
- Location
- Alaska
- Posts
- 12
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Hey Mike what is your height of your fifth wheel in the bed of the truck.
-
09-12-2020, 06:19 AM #40
- Join Date
- May 2018
- Location
- Giles County, TN
- Posts
- 97
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Mike, Linda, and Shady (terrier mix rescue)
Reflection 150 230 RL with free standing dinette (swapped location of the dinette and the recliners)
2020 GMC 3500 Denali
B&W Companion Hitch and Turning Point Pin Box locked out
Anyone Else Getting Tired of all...
Today, 03:27 AM in General Discussion