User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Seasoned Camper Lizardqing's Avatar
    Join Date
    Dec 2017
    Location
    Great Smoky Mountians - Homebase
    Posts
    322
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Thomas Payne Recliner Cup Holder Dimensions

    Anyone have the cup holders handy that are on the recliners handy that could give me the hole measurements on them? Have an idea with some scrap materials I want to give a whirl before we go full time pretty soon, but our camper is out at the storage yard. Thanks!
    Chris and Karen - currently on the coast of the Olympic Peninsula

    Roaming the country full time with our 2018 312BHTS Reflection behind a 2016 Ram 3500 6.7 Cummins and two preschoolers who are highly addicted to camping.

    Follow our adventures @brownsignjunkies

  2. #2
    Fireside Member
    Join Date
    Dec 2017
    Location
    Las Vegas, NV
    Posts
    57
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    On my 2018 303RLS the hole that the middle cup holder goes into is about 3-3/4" +/-. The top part of the cup holder has an inside dimension of about 3-5/8" +/- and then stays that way for about 1-3/4" down to where is steps in to a diameter of about 2-5/8" for the last half inch. Not sure if you wanted the outside ones with the controls too or not.
    Allyn & Sue
    2018 Reflection 303RLS
    2016 F350 Lariat PS 6.7
    Andersen Ultimate Connection 2

  3. #3
    Seasoned Camper Lizardqing's Avatar
    Join Date
    Dec 2017
    Location
    Great Smoky Mountians - Homebase
    Posts
    322
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Allyn56 View Post
    On my 2018 303RLS the hole that the middle cup holder goes into is about 3-3/4" +/-. The top part of the cup holder has an inside dimension of about 3-5/8" +/- and then stays that way for about 1-3/4" down to where is steps in to a diameter of about 2-5/8" for the last half inch. Not sure if you wanted the outside ones with the controls too or not.
    Thanks! Now to figure out something that will slide into it!
    Chris and Karen - currently on the coast of the Olympic Peninsula

    Roaming the country full time with our 2018 312BHTS Reflection behind a 2016 Ram 3500 6.7 Cummins and two preschoolers who are highly addicted to camping.

    Follow our adventures @brownsignjunkies

  4. #4
    Fireside Member
    Join Date
    Dec 2017
    Location
    Las Vegas, NV
    Posts
    57
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I did this. Small cutting board from Home Goods and then a 3" pvc drain adapter glued and screwed on the bottom. Duct tape to get final snugness desired!

    Click image for larger version. 

Name:	cupholder.jpg 
Views:	277 
Size:	86.2 KB 
ID:	11869
    Allyn & Sue
    2018 Reflection 303RLS
    2016 F350 Lariat PS 6.7
    Andersen Ultimate Connection 2

  5. #5
    Seasoned Camper Lizardqing's Avatar
    Join Date
    Dec 2017
    Location
    Great Smoky Mountians - Homebase
    Posts
    322
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Thomas Payne Recliner Cup Holder Dimensions

    Quote Originally Posted by Allyn56 View Post
    I did this. Small cutting board from Home Goods and then a 3" pvc drain adapter glued and screwed on the bottom. Duct tape to get final snugness desired!

    Click image for larger version. 

Name:	cupholder.jpg 
Views:	277 
Size:	86.2 KB 
ID:	11869
    Excellent. Just what I had in mind with a piece of 1x12 I have left over.
    Chris and Karen - currently on the coast of the Olympic Peninsula

    Roaming the country full time with our 2018 312BHTS Reflection behind a 2016 Ram 3500 6.7 Cummins and two preschoolers who are highly addicted to camping.

    Follow our adventures @brownsignjunkies

  6. #6
    Fireside Member
    Join Date
    Dec 2017
    Location
    Las Vegas, NV
    Posts
    57
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I got a pvc adapter from Lowes like this one but in black.

    https://www.lowes.com/pd/Charlotte-P...itting/3132729

    Picture from the bottom side.

    Click image for larger version. 

Name:	cupholderbottom.jpg 
Views:	201 
Size:	92.1 KB 
ID:	11870
    Allyn & Sue
    2018 Reflection 303RLS
    2016 F350 Lariat PS 6.7
    Andersen Ultimate Connection 2

  7. #7
    Left The Driveway
    Join Date
    Oct 2017
    Location
    northern ontario canada
    Posts
    8
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    We used a piece of 3 inch black abs drain pipe 4 inches long, cap it with a 3 inch black abs cap with 4 1/4" holes, add the tray ( small wood cutting board ) bolted through the cap or screwed if you prefer, add foam tape to snug up the pipe in the original cup holder

  8. #8
    Fireside Member
    Join Date
    Feb 2018
    Location
    California
    Posts
    83
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Damn I sure like this idea!!! Hope there is no patent on it because I am going to copy it ; )

    Tony P
    Tony and Barbara
    2018 Reflection 337RLS
    2017 Ford F350 KR CC/SB 4X4
    Andersen Ultimate Hitch

  9. #9
    Seasoned Camper bogen2's Avatar
    Join Date
    Mar 2018
    Location
    Edmonton, Canada
    Posts
    143
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Found a similar cutting board as Allyn and stained it to get a color closer to the rig colors. Used a 3” PVC bushing with a screw top and a screw cap. I cut off the knob on the cap and screwed it to the cutting board. Wrapped duct tape around the bushing to get a perfect fit. It’s very solid and works great for the morning coffee.

    Click image for larger version. 

Name:	3049B928-2169-4AFE-85BA-B1621F135F34.jpg 
Views:	138 
Size:	17.9 KB 
ID:	12420
    Click image for larger version. 

Name:	9461687C-C99A-481C-A0EC-AF8D2AA83081.jpg 
Views:	107 
Size:	15.5 KB 
ID:	12421
    2014 Ford F-150 Ecoboost / Max Tow / HD Payload
    2018 Reflection 295RL

  10. #10
    Seasoned Camper JDWHSKY's Avatar
    Join Date
    Dec 2014
    Location
    Hurricane, UT
    Posts
    154
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Chris:

    I got this from Beavertail Tables ([email protected]) - really like it.

    DonClick image for larger version. 

Name:	IMG_2438.jpg 
Views:	129 
Size:	85.1 KB 
ID:	12531
    2018 Reflection TT 315RLTS
    2014 F250 Crew Cab, Short Bed, 6.7 Diesel, 4x4
    50 gallon Titan fuel tank
    2007 Shelby GT Mustang

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.