User Tag List
Results 21 to 30 of 89
-
07-02-2018, 08:53 AM #21
Hi minnow101 - The bombay doors are held closed by three bolts each. (There are only the center bolts installed in the picture, but there are two more locations on each door.) Neither these fasteners nor the hinge fasteners are just screws. They are all bolts into threaded inserts.
The accumulator tank extends the water pressure available between "pump off" and "pump on". This allows things like toilet flushes without the pump coming on and is better for the pump than the quick cycling with no accumulator tank. Several years ago, I had an in-depth discussion on this forum with Brent M on how to set up the accumulator tank for maximum benefit. This discussion from 2015 is here https://www.mygrandrv.com/fo...Brent%27s+mods with the accumulator tank part between about posts 71 and 92. Brent has a Youtube video linked to post #80 where he demonstrates my advice on how to set up the tank pressure (vs the advice he got previously ).
The accumulator tank can be T'd into any cold water line and this along with a pressure gauge, are two simple additions to significantly improve the on-board pump driven water system. Attached is a picture which explains how the accumulator tank does this.
RobCate & Rob
2015 Reflection 303RLS
-
07-05-2018, 09:25 AM #22
-
07-05-2018, 09:38 AM #23
Hi Gene - These mounts sit in a through-drilled hole in the wood base and are fastened in place with two screws. The bolt through the pump foot goes down through the center but does not touch the floor underneath.
I can't even tell you what these were originally used for. I bought a bag of then at a surplus place, many years ago and have been using them to isolate vibration on a number of things ever since. I just used up my last four . . . so, I guess I will have to be on the lookout for more .
RobLast edited by Cate&Rob; 07-05-2018 at 10:00 AM.
Cate & Rob
2015 Reflection 303RLS
-
07-05-2018, 09:58 AM #24
- Join Date
- Mar 2017
- Location
- Pearland, TX
- Posts
- 1,709
- Mentioned
- 15 Post(s)
- Tagged
- 0 Thread(s)
Thanks, Rob
I was just remembering the mounts while looking for parts at McMaster-Carr - I'll take a look at mine when I'm in the basement.
https://www.mcmaster.com/#vibration-...ounts/=1dkyujs
Gene- Gene
Kim & Gene
2015 Reflection 317RST
2017 Ram 3500 CC LB 4x2 6.7 CTD AISIN 3.73 DRW Auto Level Rear Air, BD3, Prodigy P3, Aux Tank
-
07-05-2018, 10:43 AM #25
- Join Date
- Mar 2015
- Location
- N. California
- Posts
- 1,404
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
Jim & Georgianne
N. California
2016 Reflection 29RS
2008 Ford F-250 Super Duty PSD
B&W Companion hitch
Rubber turtle with no name
-
07-05-2018, 11:48 AM #26
Last edited by Cate&Rob; 07-05-2018 at 11:50 AM.
Cate & Rob
2015 Reflection 303RLS
-
07-09-2018, 04:14 PM #27
- Join Date
- Jun 2014
- Location
- South Dakota
- Posts
- 3,371
- Blog Entries
- 1
- Mentioned
- 22 Post(s)
- Tagged
- 0 Thread(s)
Outstanding work and documentation as always, Rob ! Thank you, so much for sharing this. Among the RV, boat, vehicles, home, and other......it's a good thing you have 80 hour days !
DanDan & Carol
2014 303RLS Reflection #185 (10/2013 build)
2012 Silverado LTZ Crew Duramax 2500HD
2700/16K Pullrite Superglide
-
07-09-2018, 06:16 PM #28
- Join Date
- Jan 2015
- Location
- Bend, OR and Palm Springs, CA
- Posts
- 3,043
- Mentioned
- 27 Post(s)
- Tagged
- 0 Thread(s)
To say your work and documentation are excellent would be an understatement Rob. Very well done. When I look behind access panels in my rig, I cringe and close them up as fast as I can. My OCD kicks in real fast.
Brian & Kellie
2020 Solitude 310GK-R, FBP, 1,460w solar, 540ah BBGC3, MORryde IS w/disc brakes
2020 F-350 Platinum SRW Powerstroke Tremor, 60g TF fuel tank, Hensley BD3-F air bag hitch
Previous setups:
2019 Solitude 373FB-R, 2019 F-350 Platinum DRW Powerstroke, Hensley BD5 air bag hitch
2016 Reflection 318RST, 2016 GMC 3500 Denali SRW Duramax, Hensley BD3 air bag hitch
-
07-09-2018, 06:30 PM #29
- Join Date
- Feb 2017
- Location
- Ontario, Ohio
- Posts
- 485
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Joe & Dee
Ontario, Ohio
2018 Chevy 3500HD LTZ Duramax Crew Cab SRW Short Bed Payload 3523#
2019 Reflection 337RLS bought February 2019 Dry Pin Weight = 2,320#, UVW = 11,100#
Hitch - PullRite Super Glide 2700 - 16K
Bed Cover - Roll-N-Lock
TPMS - Tire Tracker TT-500 (non flow thru)
Rear Observation Camera - Rear View Safety model RVS-155W-FB (2400-2500MHZ)
2017 303RLS bought April 2017 / Traded February 2019
Map represents States visited with our 303RLS /337RLS
-
07-11-2018, 11:20 AM #30
- Join Date
- May 2017
- Location
- Texas Fulltimers
- Posts
- 2,575
- Mentioned
- 33 Post(s)
- Tagged
- 0 Thread(s)
Well Done Rob! Great documentation for others.
when I changed my docking station side panel to a hinged door I saw the mess inside and its not near as complicated as your Reflection, I got disgusted with the whole mess and covered it back up. i probably dont want to see what is hidden by the coroplast.Steve & Tami Cass - Escapee's, FMCA Members, Texas Fulltimers Since July 2020
2019 Solitude 3350RL S-Class, 2018 Ram 3500 DRW, Laramie Longhorn, B&W Companion, Texas Class A Non-CDL Drivers License
Sharing the Fulltime Lifestyle - www.youtube.com/@tsrvadventures3219/videos, Nonprofit Channel
Lesson Learned
Today, 10:18 AM in It happened to me!!!