User Tag List
Thanks: 0
Likes: 0
Results 1 to 2 of 2
-
07-29-2018, 12:15 PM #1
- Join Date
- Jul 2017
- Location
- Ft. Myers, FL
- Posts
- 794
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
Ordering cover for my 313RLTS - length?
Getting ready to place order for a Calmark Cover for my trailer. The measurement that I'm getting from the tip of the front cap to the back of the ladder is 35' 7". I see numbers all over the board - GDRV Service says it's 34'8" cap to tail - nearly a foot difference.
I know what my tape measure says (I measured it 3 times), but does my 35'7" sound about right? This does not include the propane tanks.2016 Grand Design Reflection 313RLTS
2020 Riverstone 39FK
2016 Ford F350 Super Duty 6.7L Powerstroke Lariat 2WD DRW
-
07-31-2018, 01:54 PM #2
- Join Date
- Aug 2016
- Location
- Michigan
- Posts
- 1,099
- Mentioned
- 8 Post(s)
- Tagged
- 0 Thread(s)
Jim1521,
I used a known straight board and held a level on it and rested it against the front cap. Marked the cap and measure from this point to the back of the unit at the same height above the aluminum skirt. I have a Calmark cover on my 2600RB and it fits perfectly. Nice folks there as well. I use swimming pool storage pillows under the cover on the roof to help to drain off rain and melting snow.MidwestCamper
Jim & Dawn
Near Milford, Michigan
2017 Imagine 2600RB
2015 GMC Sierra 1500 Double Cab 4x4
Washing machine on/off valve
Today, 04:24 PM in Plumbing and Water Systems