User Tag List
Results 1 to 10 of 23
-
08-02-2018, 12:40 PM #1
Lubrication of landing gear on Reflection 150 series
I have the 220RK and I can't find anything in the owner's manual or any of the documentation I received with the trailer, regarding lubrication of the front jacks, the landing gear.
I looked in the compartment and it appears to be sealed.Resistance is Not Futile, It's Voltage Divided by Current.
-
08-05-2018, 02:54 PM #2
The only thing I found was if the Landing Gear was to be extended for an long period of time, you should spray with Silicone on the extended parts
Mark & Cindy, York, PA
2018 Reflection 150 Series 230RL (White)
Curt A16 Hitch, Turning Point Swivel Pin Box, set to Swivel, with Curt Wedge
2019 Ford F250 STX 6.2L with 4.30 Gears, SB CC SRW 4x4, 18" Wheels, 3192 Payload, 15,000 Towing Capacity, Fifth Wheel Prep & Camper Package, Ultimate Trailer Tow Camera, Factory Ordered
Prev TV: 2016 F150 3.5L Supercab with 6.5' bed, 2167 payload, LT Tires, and Air Lift 5000 air bags set to 15lbs
-
08-05-2018, 04:04 PM #3
DMB - I think the landing gear on the Reflection 150s is the same as used on the larger Reflections before auto levelling. If so, there will be two grease zerk fittings on each leg, inside the front compartment. These may be on the front face of the upper leg housing and might be difficult to see.
RobCate & Rob
2015 Reflection 303RLS
-
08-05-2018, 04:05 PM #4
-
08-05-2018, 04:06 PM #5
-
08-07-2018, 09:47 AM #6
- Join Date
- Oct 2017
- Location
- Clinton NJ
- Posts
- 20
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Did you find any zerk fittings?
-
08-13-2018, 02:05 PM #7
- Join Date
- Jul 2018
- Location
- Minden, Nevada
- Posts
- 64
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Found two on each leg of my 230RL. Gave each two pumps with my grease gun.
-
08-13-2018, 06:22 PM #8
-
08-13-2018, 06:44 PM #9
- Join Date
- Jul 2018
- Location
- Minden, Nevada
- Posts
- 64
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Mine were on the front of each leg, near the top and heavily painted with glossy black paint. I took a punch and pushed on each check ball before adding grease
-
08-13-2018, 10:26 PM #10
Need help with Imagine 2600 RL
Today, 10:46 AM in General Discussion