Furrion 50 amp outside plug (led stopped working)

[Sersteve]

when I first bought my 303RLS whenever I was plugged into 30 or 50 amp the LED on the cap would glow blue showing I had power now it does not work, anyone else experienced this problem.

[Not tired, just retired]

We've had our 303 since March and it still works fine. I would guess if you still have power and just the LED's on the cord aren't working GD would replace the whole cord, or the cord manufacturer. The LED's are a nice feature, especially when we have it parked at home so we know it still has power to everything without going in the rv to check.

[Dave and Monica]

You're referring to the 2 blue LEDs on the receptacles cover. They work on mine when using the factory 50A cord but don't when I'm using an adapter (marinco 50A to 30A) into a 30A cord. I figure that they must receive power from something on the factory marinco connector that's not on the one on the adapter.

Dave

[luckeyd1]

My 303 is plugged in from a house 110V, using a 20AMP to 30AMP and the same 30AMP to 50AMP adaptors and both Blue LED lights are working on mine. I saw an article about those lights, both blue, no problem, if one is blue and the other red, there is a problem. Here is the link to a supplier of the cord that describes how it works, interesting.

http://www.pplmotorhomes.com/parts/r...ower-cords.htm

[Eaglehead]

Great info. thanks for the post.

[Dave and Monica]

Doh! I should have checked before I typed! It's a single blue LED on the receptacle cover and it's still on with the 50A/30A adapter though it seems fainter now than I remember.

Dave

[Sersteve]

Thanks for the reply, my lights (led) work fine on the male end of the cord with the two leds. It's the single led light on the the receptacle where you plug in the cord, the led in that cap doesn't work anymore. But yet I have power to the camper And yet my led on the receptacle cap isn't working.

[Not tired, just retired]

Sersteve,
OK, I understand now. All my led's are working. Honestly I didn't know of the led on the cap until now.

[Sersteve]

Mine still not working. Anyone else experience this. The link shows the Power Smart LED embedded into the inlet cap that doesn't work.

http://www.pplmotorhomes.com/parts/r...wer-inlets.htm

[Sersteve]

Grand design customer service, Can you guys give me some clarification as to what you think I should do that this ?is it warranty work or ?