Backup camera wiring for Solitude?

Aeromech · 08-02-2014, 12:20 AM

I noticed mention of backup camera wiring for the Momentum but haven't heard if there is anything available on the Solitude line. Also any recommendations on good wireless camera systems?

**huntr70** · 08-02-2014, 05:08 AM

No difference in wiring. They tie into the clearance lights on the rear for power.

Wireless monitor goes into the tow vehicle...

**huntr70** · 08-02-2014, 05:09 AM

Most people use the Voyager system. (That is what the factory installs also)

Aeromech · 08-03-2014, 09:14 PM

Does that mean the camera is only powered if the clearance lights are on? Or is there a dedicated wire behind the center marker light. I guess you wouldn't want it draining power all the time unless you had a separate power switch, but I would like to be able to activate it without using running lights or reverse. Research, research, research

**huntr70** · 08-04-2014, 05:12 AM

They are powered by the running lights.

There is no dedicated wire for the camera.

Most people tow with their headlights on (which usually activates clearance lights as well).

**LCBoyer** · 03-19-2015, 10:14 PM

There is a cable, I traced it to the foam, eased those wires out and soldered power leads to camera. Sitting still I had 13.4 VDC it worked for a while when I got to Vegas it kept going on and off I checked voltage and it fluctuates. A loose connection scares me more than a short. Loose can arc and cause fire