Mounting TV in GD303RLS Bedroom

[pcjunki]

Has anyone ever installed a TV in the bedroom and if so would you share how you did it and what was used.

[redram]

I have a 32 inch in the bedroom, kinda big but its what i had. Used a mount that is made for rvs. Has a chain you pull to release and swivel out. Locks in place. There is a sticker on the wall that marks where the reinforcement is. Don

[Eaglehead]

This is what I used and it works great. Got it from Amazon.com Cheetah Mounts ALAMB Articulating Arm TV Wall Mount Bracket for VESA 100 12-24" LCD LED Flat Screen Monitors Display/TVs up to 40lbs Includes Free 10' HDMI Cable and 6" Bubble Level
I replaced the nut for a wing nut where it mounts to the arm so I can remove the TV when traveling.

[WhittleBurner]

We used magnets to mark off the backing plate. Used the same mount as redram, it's made by Mor/Ryde and really does hold the TV in place during travel.
A little pricy but well worth not having to mess with taking the TV on and off the wall all the time I got it off Amazon.

[Eaglehead]

There is another reason I remove the TV from the camper and that is the TV I use in the bedroom is the one from the kitchen in our house, after paying for a new truck and camper I didn't have money left to buy specifically for the camper ------

[Pack Rat]

What make and model of TV mount did you use for the 32 inch TV in the bedroom of your 303.

[Eaglehead]

I use a 24" not a 32", I don't think it would work mounted on the wall because of the weight and the length of the arm to be able to swivel it to face the bed. This is what I used and it works great. Got it from Amazon.com
Cheetah Mounts ALAMB Articulating Arm TV Wall Mount Bracket for VESA 100 12-24" LCD LED Flat Screen Monitors Display/TVs up to 40lbs, Includes a Free Twisted Veins 10' Braided High Speed with Ethernet HDMI Cable and One 6" 3-Axis Magnetic Bubble Level. Item model number: ALAMB-2