User Tag List

Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18
  1. #11
    Big Traveler Calbar's Avatar
    Join Date
    Sep 2018
    Location
    Ontario, Canada
    Posts
    1,421
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by cfowler55 View Post
    I installed the Moryde chair buddy. Works well but we only use two chairs.
    That is quite the interesting way to hold the chairs. I may have to look into getting me a set or 2 for the 4 chairs.

    Rob
    Rob & Barb
    2022 Solitude 378MBS
    2022 RAM 3500 SRW HO Aisin 4x4
    Waterloo, Ontario, Canada

  2. #12
    Rolling Along cfowler55's Avatar
    Join Date
    Oct 2017
    Location
    Dripping Springs , Texas
    Posts
    611
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Calbar View Post
    That is quite the interesting way to hold the chairs. I may have to look into getting me a set or 2 for the 4 chairs.

    Rob
    I'm not familiar with you're table set up but you may need to get a bit creative. Ours is wall mounted on a 90* C channel. I fabbed up a bracket and attached it to the channel. That gave me a nice surface to attach the CB to. They offer a bracket to allow attaching to the underside of the table. We put an oven mitt between it and the cushions so it doesn't indent them.
    Vickie & Charlie
    2019 310GK-R
    2020 RAM Longhorn DRW Cummins /Aisin

  3. #13
    Big Traveler Calbar's Avatar
    Join Date
    Sep 2018
    Location
    Ontario, Canada
    Posts
    1,421
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by cfowler55 View Post
    I'm not familiar with you're table set up but you may need to get a bit creative. Ours is wall mounted on a 90* C channel. I fabbed up a bracket and attached it to the channel. That gave me a nice surface to attach the CB to. They offer a bracket to allow attaching to the underside of the table. We put an oven mitt between it and the cushions so it doesn't indent them.
    My table is free standing on a center pedestal just like in the pictures. Just need to make sure that I have the flat spot that the brackets need for mounting and then I think I am good to go. I like the oven mitt idea. I was wondering about the indents as well.

    Rob
    Rob & Barb
    2022 Solitude 378MBS
    2022 RAM 3500 SRW HO Aisin 4x4
    Waterloo, Ontario, Canada

  4. #14
    Full Timer warsw1's Avatar
    Join Date
    Apr 2017
    Location
    Central Oregon
    Posts
    573
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    We always strap ours down. It takes all of a minute to strap both chairs. When we arrive at our destination we just remove the straps and put them in the closet which takes another minute. Strapping the chairs down will assure you that they are not rubbing against the table or wall and causing damage as you travel. IMHO

    PS My straps have clips on both ends so they are easy to remove.
    Last edited by warsw1; 01-01-2019 at 08:37 PM.
    Randy & Sharon (Went full time April 14th 2017)

    2016 Ram CC SB Outdoorsman 4x4 CTD
    Michelin 295/70R18
    Fold-A-Cover G4 tonneau,
    Dee Zee truck bed mat,
    Dee Zee tailgate assist,
    Dodge Ram 4x4 Steering Gear Box Brace
    Fumoto oil drain valve,
    Husky floor liners,
    WeatherTech No Drill Mud Flaps,
    Firestone Ride-Rite Suspension Kit
    Reece Pro Series 20K lb 5th wheel hitch

    2018 Solitude 375res
    8K lb axles, springs & hubs with Nev-R-Lube bearings
    MORryde HD shackle kit with brass bushings & wet bolts
    Reece Sidewinder 19K lb pin box.

  5. #15
    Setting Up Camp
    Join Date
    Aug 2017
    Location
    AR
    Posts
    27
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    My normal tow is three miles one-way from the storage unit to our favorite campground. After a few trips, I quit using the straps and didn't have a problem. In the Fall, we did some longer trips through twisty roads and some of the chairs fell over. I will start using the straps again for tows over a few miles.

  6. #16
    Seasoned Camper chunker's Avatar
    Join Date
    Mar 2018
    Posts
    397
    Mentioned
    3 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by livinthelife View Post
    We tried to do this, but the space wasn't large enough for 2 chairs.

    I just toss the straps further under the chairs (toward the outside of the rig) when we're camping. That way they're out of the way. And we use them when traveling, Some of the roads we've traveled on could cause those chairs to bounce around in their allotted space, damaging them, or the table.
    Or bust a window out.
    2020 Ram Laramie 3500 DRW
    Solitude 320X sold
    2020 Raptor 356
    2012 Primetime Crusader 355BHQ (GF's)

  7. #17
    Site Sponsor Richter's Avatar
    Join Date
    Mar 2018
    Location
    Near Pittsburgh, PA
    Posts
    489
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by warsw1 View Post
    We always strap ours down. It takes all of a minute to strap both chairs. When we arrive at our destination we just remove the straps and put them in the closet which takes another minute. Strapping the chairs down will assure you that they are not rubbing against the table or wall and causing damage as you travel. IMHO

    PS My straps have clips on both ends so they are easy to remove.
    We also have the clips on the end of the straps, and always use them. When we arrive, we just unhook them, raise the seat bottom and drop them in. They’re ready for our next departure. Since there are only two of us, we leave the folding ones at home in the basement.
    Tom and Janice (known as Tom in PGH on the “other” forum)

    First came the 18' Comfort bumper-pull, was great for 20 years.
    Now a 2019 Reflection 303RLS, second air, double glass, table and chairs
    2019 F350 Lariat (Diesel) 4x4 Crewcab with lots of goodies
    Andersen aluminum with the puck system holding it all together
    Cranberry Twp. PA, about 30 miles north of Pittsburgh

  8. #18
    New Member
    Join Date
    Apr 2020
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    We Just bought a 2020 353g. I think I figured out how the garage table stores, I found 2 straps on the upper bunk that the table connects to, I also found 2 other straps in a cabinet that I think may be for strapping the chairs and ladders down but not sure where they strap. I couldn’t find any other mounted straps anywhere in the garage. Just curious if anyone has figured out the proper storage spot for the chairs and ladders?

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.