Suggestions for spring and equalizer upgrade

[jh2pizza]

Here is something interesting. We purchased a 2019 297RSTS. Every post I have seen states they added the wet bolt kit. Our unit come with the 5200# dexter axles and the wet bolt kit from the factory. So if I install the CRE3000, will these factory bolts work or do I need to order Morryde kit?

[Appfan]

If you want to go "full boat" upgrade, look into the Comfort Ride Suspension. Removes the springs and replaces them with actual shocks.

FYI - I was incorrect. The comfort ride adds shocks to your existing suspension. It does not replace the springs.

[reeldirtydawg]

JH2pizza--Interesting you mentioned wet bolt kit added from the factory. Our 2019 297RSTS did not come with wet bolts, I added the MoRyde upgrade and what I removed was not wet bolts. Just curious what you read that stated they came stock from the factory.

[gbkims]

Here is something interesting. We purchased a 2019 297RSTS. Every post I have seen states they added the wet bolt kit. Our unit come with the 5200# dexter axles and the wet bolt kit from the factory. So if I install the CRE3000, will these factory bolts work or do I need to order Morryde kit?

Bolt diameter is probably the same and length for use with 1/4" thick shackles.

I'd think you'd want the MORryde heavy duty shackle kit with 1/2" thick shackles along with the CRE3000.
MORryde shackle is on the right.

You need to check your axle spacing to get the correct CRE3000.
Tandem Axle - 35-Inch Wheel Base = MORryde CRE2-35 CRE3000 Suspension System, NOTE: 2-1/4" SHACKLES REQUIRED
33" Tandem Axle is CRE2-33

CRE3000 Qualification Guide http://www.morryde.com/uploads/downl...%202018_v3.pdf

Shackles


Suspension http://www.morryde.com/products/90-c...2F4-suspension