We purchased a DISH Tailgate satellite system for our 2014 Reflection 303 RLS. When we called DISH for assistance in connecting it, we found that we had to bypass the cable connection in the center outside because it wouldn't get a signal. They told us we'd have to come through a window with the satellite cable, which we did, and connect to the receiver that way. We did, but now ,the cable is hanging in sight from the cupboard going out through the window, and we, especially my wife, are not very pleased with it. In the Reflection manual, there is a picture of the utility center outside with a place for satellite hookup. The picture is not like ours, which has the cable, living room and bedroom. Any suggestions on how to remedy this or has anyone else run into this?

Also, when trying to feed the HDMI cable through the hole in the upper left cabinet from the receiver to the TV, there are so many cords going down through there, that it just coils up and won't go down. Any suggestions there?

Any ideas would be greatly appreciated.