LED Awning lights stopped working

[DennisK]

3rd trip out and I went to turn on the LED awning lights and they did not come on. The switch inside teh control panel illuminates but after several attempts to get them to work, no luck. They worked last weekend...


Any thoughts?

Dennis

[Dave and Monica]

There should be a 12V fuse in the DC panel for it...have you checked it?

Dave

[DennisK]

i figured it out. It helps if you have the awning extracted all the way out! Apparently, I was one rotation shy (story of my life) or having it fully extended and the lights were working, just not visible.

[Dave and Monica]

You could use that for a 'dimmer' function!

Dave

[DennisK]

you may have an idea there!

[ZeroDaze]

I know this is an old thread but it helped me. My awning lights stopped working in my 2019 375 res. I called GD and was told there was a “light control module” behind the panel in the front pass thru. After 30 minutes of taking it apart and searching, I gave up.

Came to the forum, saw this thread, checked behind the switch panel in the cabinet, and found a 2 amp 12v blade fuse blown. I replaced the fuse that’s connected to the awning switch and presto! Just wanted to share the fix that was suggested worked.



Sent from my iPhone using Tapatalk