User Tag List
Thanks: 0
Results 1 to 7 of 7
Thread: Hitch height?
-
03-18-2019, 01:54 PM #1
- Join Date
- Mar 2018
- Location
- Old Hangtown
- Posts
- 119
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Hitch height?
When I go to reconnect, trailer will not go to the correct hitch height. Always higher. Any ideas?
2022 Silverado Duramax/Allison 2500 HD
2018 Momentum 328
2018 Polaris RZR
2005 Polaris Sportsman 500
-
03-18-2019, 04:23 PM #2
- Join Date
- Apr 2017
- Location
- Fort Collins, Colorado
- Posts
- 1,305
- Mentioned
- 26 Post(s)
- Tagged
- 0 Thread(s)
"Hitch height" is the height the nose/king pin was at when you hit "Auto Level". Is your "return to hitch height" height higher than that?
ChrisChris & Karen
Fort Collins, CO
2017 F-350 SRW 6.7 Lariat Value CC LB 4x4
2018 Solitude 310GK - Sold 7/2023
-
05-11-2019, 05:32 PM #3
-
05-11-2019, 06:24 PM #4
- Join Date
- Apr 2017
- Location
- Fort Collins, Colorado
- Posts
- 1,305
- Mentioned
- 26 Post(s)
- Tagged
- 0 Thread(s)
I have only seen the "function disabled" when I have either lost 12V power to the controller after "autoLeveling" or (sometimes) when I have made manual adjustments after "autoLeveling". Do either of these fit your situation? Also, do you have the hydraulic "LeveUp" or the electrical "Ground Control" leveling system? I have the LevelUp in our Solitude. The systems might be different in some details. Adding you truck & trailer information to your signature may help to get a more specific answer.
ChrisChris & Karen
Fort Collins, CO
2017 F-350 SRW 6.7 Lariat Value CC LB 4x4
2018 Solitude 310GK - Sold 7/2023
-
05-12-2019, 07:03 AM #5
Thanks Chris. You mentioned some good possibilities so I'll pay more attention to what has happened just prior to the error message. I do have the hydraulic system, btw.
Also, I literally had just joined this forum moments before my posted question so I haven't yet figured out how/where to fill in that signature stuff. I have a 2018 Solitude 344GK-R pulled by a 2012 F350 Lariat Superduty 6.7 CC LB 4x4 dually. Buddy is the dog (a Sporgi).
Ken & Suzi
Dallas, OR
-
05-12-2019, 07:19 AM #6
This should help, it's from LCI manual. The operation is a little different for those with OneControl, but same idea.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
05-12-2019, 05:58 PM #7
FT4NOW I think you've nailed the problem. The pin box is almost certainly not above level, which would explain the "Disabled" message. I'll try again with the pin box above level. Thanks for the tip!
Ken
2022 367BHS Reflection 5th wheel ...
Today, 07:31 AM in Trailers For Sale & Wanted