User Tag List
Thanks: 0
Likes: 0
Results 1 to 10 of 11
-
09-01-2014, 04:20 PM #1bgilmlbzGuest
369RL cant get water to gravity feed to holding tank
This weekend is the first weekend that I have needed to add fresh water while out camping. I hooked up my water jugs and had the selector switch on gravity but it WILL NOT let me put water into the tank. We even tried forcing it in by pushing on the water jug. The crazy part is I can still fill my tank with the city hose.
Last edited by bgilmlbz; 09-01-2014 at 06:13 PM.
-
09-01-2014, 05:08 PM #2
- Join Date
- Sep 2013
- Posts
- 94
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
You have to use the pump to suck it from your jug to the holding tank.
Last edited by LostinCanada; 09-01-2014 at 05:09 PM. Reason: grammar
-
09-01-2014, 05:18 PM #3
- Join Date
- Nov 2013
- Location
- Gore Bay, Ontario
- Posts
- 2,171
- Blog Entries
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
You can't gravity feed to fill the FW tank...you use the FW pump suction to transfer from the tote/jug to the tank. There should be a valve position diagram on the back of the docking station door showing the positions of the Kantleak valves and tank access valve. To transfer you set the one Kantleak valve to sanitize/winterize (12 o'clock position), and the tank access valve to open (3 o'clock) and turn on the pump. Of course you'll need a hose to use for a suction line in the tote. It should transfer a 6 USG tote in 2.5 to 3 minutes...lots of time to plan the rest of your day!
DaveDave and Monica - Gore Bay, Ontario
Vitus the Hungarian Vizsla
2014 Reflection 337 RLS #129
2008 F250 V10 CC Lariat RWD
-
09-01-2014, 05:22 PM #4
- Join Date
- Sep 2013
- Posts
- 94
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
09-01-2014, 06:07 PM #5bgilmlbzGuest
Thanks Dave,
Mine is a very early 369RL. No diagrams and can't even get a wiring schematic for it...at least last time I asked. Any chance you could send me a picture of the diagram off the door?
Brett
-
09-01-2014, 06:15 PM #6bgilmlbzGuest
I just looked and I don't have a tank access valve. I have the winterize valve and 1 other for city or gravity feed. Is that the tank access valve?
-
09-01-2014, 07:51 PM #7
- Join Date
- Nov 2013
- Location
- Gore Bay, Ontario
- Posts
- 2,171
- Blog Entries
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Here's the valve position label on a Reflection...I had an extra label in my manual.
DaveDave and Monica - Gore Bay, Ontario
Vitus the Hungarian Vizsla
2014 Reflection 337 RLS #129
2008 F250 V10 CC Lariat RWD
-
09-01-2014, 09:14 PM #8
-
09-01-2014, 09:38 PM #9
- Join Date
- Nov 2013
- Location
- Gore Bay, Ontario
- Posts
- 2,171
- Blog Entries
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Sorry, but I'm not able to enlarge that enough to be able to read it. It's obviously a different set-up...perhaps another Solitude owner can chime in.
DaveDave and Monica - Gore Bay, Ontario
Vitus the Hungarian Vizsla
2014 Reflection 337 RLS #129
2008 F250 V10 CC Lariat RWD
-
09-01-2014, 10:40 PM #10
- Join Date
- Aug 2014
- Location
- Enumclaw Washington
- Posts
- 130
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Similar Threads
-
Gravity feed fresh water inlet???
By Jerryr in forum ExteriorReplies: 14Last Post: 05-25-2020, 12:09 PM -
Propane gas feed for BBQ from the tanks from the tanks on the 5th wheel
By Tow'd hauler in forum Mods and DIYReplies: 10Last Post: 08-04-2017, 06:19 AM -
Gravity fill from 5 gal tank
By AgRV01 in forum Plumbing and Water SystemsReplies: 9Last Post: 08-15-2016, 03:13 PM -
Low water pressure on city water and using pump with holding tank
By Glamper in forum Plumbing and Water SystemsReplies: 1Last Post: 03-27-2016, 06:00 PM -
No Gravity Fill for Fresh Water
By 1Papaw in forum General DiscussionReplies: 9Last Post: 06-16-2015, 05:05 PM
Anyone Else Getting Tired of all...
Today, 03:27 AM in General Discussion