User Tag List
Thanks: 0
Results 1 to 5 of 5
Thread: Curt 13703 Hitch Installation
-
04-06-2019, 06:57 AM #1
- Join Date
- Jun 2018
- Location
- Tampa, FL
- Posts
- 78
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Curt 13703 Hitch Installation
Finally got serious about doing this and got it done. The bumper has to be removed for clearance so you have to be serious before you start! I used a saw zall and took about 10 blades. The underbelly has to be removed and the stabilizer jacks have to be relocated (I haven’t completed this yet). So I will try to add pics and let me know if you have any questions or want better pics of anything. Also, because you have to remove the bumper, you also have to put the spare somewhere else. I am still deciding where I will put mine.
Last edited by TheRealMacGyver; 04-06-2019 at 07:08 AM.
~Patrick
2018 Imagine 2400BH
2016 GMC Yukon XL
-
04-06-2019, 07:06 AM #2
- Join Date
- Jun 2018
- Location
- Tampa, FL
- Posts
- 78
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Oh and I should also say before someone says it, I know all about how this could void my “warranty” . The thing is, I have learned how useless the warranty is on these things, so it is a non-issue for me. Anyhow this is really meant to help anyone that is or has been considering this upgrade. Probably not for everyone and you are doing it at your own discretion.
~Patrick
2018 Imagine 2400BH
2016 GMC Yukon XL
-
04-06-2019, 09:07 AM #3
- Join Date
- Jul 2017
- Location
- SW Indiana
- Posts
- 1,989
- Mentioned
- 43 Post(s)
- Tagged
- 0 Thread(s)
I’m in the middle of the same deal on my 303RLS. Very similar findings other than the spare. It took my bumper off by removing the brackets from the I-beams which was much more difficult than I expected.
John & Kathy
2014 F250 Lariat FX4 6.2L SBCC
2014 Reflection 303RLS
SW Indiana
-
04-12-2019, 06:45 PM #4
- Join Date
- Jun 2018
- Location
- Tampa, FL
- Posts
- 78
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
~Patrick
2018 Imagine 2400BH
2016 GMC Yukon XL
-
04-12-2019, 07:16 PM #5
- Join Date
- Jun 2018
- Posts
- 2,356
- Mentioned
- 16 Post(s)
- Tagged
- 0 Thread(s)
Great job. I see the can in the picture , Was this a 1 can job , or was that the last?
Brian
310GK Bounce When Towing
Today, 11:04 PM in Fifth Wheel Hitching Topics