Furrion Television DISH and DIRECT TV Codes

[ruskin219]

Does anyone know the codes for either DISH or DIRECT TV remote control programing codes? I couldn't find any answers via several web searches or with technical support for either satellite signal provider. Both direct me to the manufacturer of the unit - Furrion. Naturally there is no technical support from either Furrion or their support phone number.

Anyone else fought this battle?

I recently purchased a 2015 Reflection 303 RLS. Worked on setting up Dish today. I was also unable to find a code for the Furrion TV but successfully performed the manual scan. The Dish remote works fine. The only problem is that there is no way to identify the code using a manual scan so I will have to go through the same process every time I move the receiver box from our home to the RV for a trip. It's much simpler when the specific code is known but only a minor inconvenience otherwise. I have an extra remote. I'm going to try to program it to the receiver box and TV and then simply leave it in the RV.

[ruskin219]

I did a manual scan this morning. The code for Dish remotes is 550. Here's a link on how to program your Dish remote:

http://www.mydish.com/support/progra...code-non-basic

I manually programmed mine also. Just curious, but how do you determine the code # after the manual procedure? I'll try 550 on mine and see if it works. Sure would make it simpler every time I moved the receiver and remote from my house to the RV.

[Mimbapat]

We're you able to program your Harmony Remote to your Furrion Tv? I bought one yesterday and Harmony couldn't find the Furrion tv code. How did you do it.

[ruskin219]

My Dish TV remote is made by EchoStar Technologies and it was provided by Dish TV. I used code #550 to program it to the 32" Furrion TV as recommended on this forum. If it doesn't work on you TV just follow the programming instructions provided with your remote

[melbin]

I tried the 550 on my remote did not work, tried manual no luck, I have the 46 in furrion. just waiting for a fix, I will use furrion for off and on and sat remote for tuning. all ideas welcomed thanks

[TucsonJim]

Melbin - follow the link that Ruskin reposted on #12 above, and you can run the manual programming method. It will store the code and you can recall it.

[Ranbud]

Furrion tv Remote code is 10054

[dirtclod]

Is this for dish or direct tv, thanks!!

[Ranbud]

Is this for dish or direct tv, thanks!!

This works for direct TV remotes

[webpilot]

Has anyone found the Direct TV code for the Furrion Stereo to control the volume? I realize that it may not turn it on and off, but would be nice to adjust the volume with the Direct Remote.

On my 337, the Direct remote turns on the Furrion TV, but will not turn it off. I think I am using the 10054 code in it, but don't know how to check the code in the Genie remote.

Thanks,
George