User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
Thread: One leveling jack not working?
-
05-12-2019, 04:49 PM #1
- Join Date
- May 2019
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
One leveling jack not working?
We are full time in our 2019 28bh. We have only had it 4 days, during the leveling process today I got a LR jack error. The jack was that only working intermittently. I could not get it low enough to stabilize the LR of the unit so after many failed attempts to resolve this I ran it down with my drill and 5/16 socket. It is totally inoperable now while all the other jacks work fine. I’m calling Grand Design and Lippert tomorrow but just wondering if anyone has seen this? Thanks!
-
05-12-2019, 06:23 PM #2
- Join Date
- Sep 2013
- Location
- PA
- Posts
- 4,512
- Mentioned
- 240 Post(s)
- Tagged
- 0 Thread(s)
There is a procedure in the Lippert Ground Control manual to rest them. It specifically mentions jack errors.
Steve- Inventory Manager at Tom Schaeffer's RV, Shoemakersville, PA www.tomschaeffers.com
[email protected]
2011 RAM 3500 SRW Outdoorsman Edition 4X4, 6.7 Cummins--TWEAKED!
2021 Reflection 310RLS
-
05-12-2019, 06:37 PM #3
- Join Date
- May 2019
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I went through the procedure, 3 jacks work but the left rear is still inoperable
-
05-12-2019, 07:08 PM #4
- Join Date
- Sep 2013
- Location
- PA
- Posts
- 4,512
- Mentioned
- 240 Post(s)
- Tagged
- 0 Thread(s)
Have you checked the wire connections at that jack?
I would also check the connections at the control box in the front compartment. Plugs come loose sometimes.Steve- Inventory Manager at Tom Schaeffer's RV, Shoemakersville, PA www.tomschaeffers.com
[email protected]
2011 RAM 3500 SRW Outdoorsman Edition 4X4, 6.7 Cummins--TWEAKED!
2021 Reflection 310RLS
New Grand Designer Owner to be
Today, 01:11 AM in General Discussion