Slide out "out of whack"

[BigH5500]

Sorry for not following my own thread. I did fix it myself. The trailer was level before I opened the slide outs. The bottom front was not fully sealed but the bottom rear was. I loosened a nut on the extending rod and turned the nut text to it until the slide was where I wanted it.... sealed then tightened the locking nut next to the adjusting nut. There was no air or water coming in but it wasn't right. It's all good now. Thanks.

[Ditkitty]

Just my 2 cents worth - we also had slide issues. The LR slides would seem to "bind" occasionally when extending or retracting. Had it into the shop, and they found that the seal had actually been installed too long and was getting pulled into the track. All the "resync-ing" in the world wouldn't have helped that :-(