User Tag List
Thanks: 0
Results 11 to 12 of 12
Thread: easy start...
-
05-30-2020, 02:59 PM #11
- Join Date
- Apr 2019
- Posts
- 15
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I’m happy to report that the Micro-air EasyStart was pretty simple to install on the Coleman Mach AC
http://www.micro-air.com/support-doc...stallation.pdf
I strongly suggest buying a pair of good quality crimpers and a pair of strippers. I paid $30 and $15 respectively at Home Depot.
My Honda 2200 runs the AC and TV and battery charger with no overload.
-
06-17-2020, 07:56 PM #12
- Join Date
- Oct 2016
- Posts
- 317
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
FYI - the Easy Start only helps on A/C startup. It does not lower the running current after start up. Most lower wattage generators crap out during the start up phase of the A/C. With the easy start they can stand the start up current load and then continue to run the a/c after it gets going. I can start and run a 15k unit with one 2000 watt Honda with the easy start. The Honda couldn't start the same a/c without the easy start.
Steve
2017 F350 6.7 Lariat DRW
2017 Momentum 388M
North of Houston
Charging Lithium Batteries From...
Today, 12:46 PM in Electrical System and Wiring