User Tag List
Results 1 to 7 of 7
-
06-07-2019, 02:28 PM #1
- Join Date
- Oct 2018
- Location
- Madison, AL
- Posts
- 98
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Dimmer Switch Installation on Cabin and Awning Lights on 303RLS
Second mod wife and I completed yesterday was addition of dimmer switches to our main cabin and awning lights. We find the cabin lights to be too bright in the evenings while we're watching TV or a movie. The awning lights are so bright we don't turn them on very long if we've got a neighbor in the next campsite, especially if we'll be out of the camper after 10 pm.
I used this dimmer on both switches.
https://amzn.to/2CYWkc8
This video on Youtube is fairly helpful but there are differences on the wiring between what is shown for an Inspiration trailer and my Reflection 303RLS.
https://www.youtube.com/watch?v=pPX_S9wx4l8
I did procure two 3d printed adapters from the person who did the video - Marty Robinson. The adapters, plus shipping were $14 total. Marty's contact info is [email protected].
As shown in the video, first thing is to remove the cover plate on the panel. I used a flat head screwdriver and took my time. I found prying from the inside was more effective than the outside. Removing the screws after that is straight-forward. Unfortunately, instead of finding a black and red wire as in the video, the two connections on the main cabin lights were both half red and half white (top in photo with blue connector ends). Same for the awning lights just below except both were half pink and half white on top and bottom. So, had to use the multi-meter to determine 12 v versus ground/common. For my camper, the top connections for both were 12 v, the bottom connections were ground/common. Removal of the switches was simple per the video as was snapping in the 3d printed adapters. Connection of the new switches per the video was also straight-forward. Check correct switch operation before re-installing the panel.
No issues with the control panel door closing even though the new switches stick out a fair amount more than the OEM switches.
Last edited by jlspence99; 06-07-2019 at 03:04 PM.
Jeff & Susan
With Annie, our dachshund
2019 Reflection 303RLS #123, TST 507 TPMS
2019 F-350 XLT 4x4 PSD SRW CC LB Factory 5th Wheel Prep Package
B&W Companion OEM Hitch
-
06-07-2019, 03:01 PM #2
- Join Date
- Nov 2018
- Location
- Southern Nevada
- Posts
- 343
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
Thanks for the write up. On my list to do.
2013 Ram Cummins 3500
2019 GD 303RLS-SOLD
-
06-07-2019, 07:20 PM #3
- Join Date
- Jan 2018
- Location
- Northern Illinois
- Posts
- 238
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
This is one I may have to do as well. Thanks for the info.
VinceVince and Peg
Kennedy (Bernese Mountain Dog)
2017 Chevy Suburban Premier Edition w/max tow pkg.
2018 GD Imagine 2600RB
-
06-07-2019, 09:18 PM #4
- Join Date
- Jan 2019
- Location
- J-ville, FL
- Posts
- 263
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
I did this about two weeks ago and we got to test it last week on out trip. All worked well, but I noticed that if both are on I get flicker. Did you notice any?
Sent from my SM-G892A using Tapatalk2015 Chevy 1500 5.3L LT-Z71 Double Cab Standard Bed
Roadmaster Active Suspension Kit
Tekonsha Prodigy P3 Trailer Brake Controller
Equalizer 1k/10k hitch w/sway bracket jackets
2019 Imagine 2600RB
-
06-08-2019, 04:20 AM #5
-
10-07-2019, 06:46 PM #6
- Join Date
- Oct 2018
- Location
- Madison, AL
- Posts
- 98
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
No flicker for me.
Jeff & Susan
With Annie, our dachshund
2019 Reflection 303RLS #123, TST 507 TPMS
2019 F-350 XLT 4x4 PSD SRW CC LB Factory 5th Wheel Prep Package
B&W Companion OEM Hitch
-
10-07-2019, 07:31 PM #7
- Join Date
- Nov 2018
- Location
- Colorado
- Posts
- 94
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I did the same mod, to the awning lights, master bedroom and main living area. I noticed a flicker if I crank the dimmer all the way on. It seems like at 3/4 of a turn I hit full brightness and that's as far as I need to go. I only notice the flicker on the interior lights though... I'm not an electrician/electrical engineer so that one kind of baffles me.
2019 Reflection 367BHS with a few mods
2018 F350 6.7 SRWD CCSB
1971 F250 Highboy with lots & lots of mods...
Morryde Safe-T-rail install issues
Today, 12:55 AM in Mods and DIY