Low shower preasure

[mlisenby54]

Getting extremely low shower preasure during use. Getting good pressure from the sinks but terrible in shower, Any thoughts??

2016 Momentum 350M

[offtohavasu]

Try unthreading the shower head and see if there's good pressure out the hose as well as see if any gunk in the shower head.

[mbaker]

Look for a flow restrictor in the connector between the hose and the head, I removed mine.

Milton Baker

[mlisenby54]

You talking about that little white 3-hole restrictor? What did you use to remove it?

[mbaker]

Stick a pin through one of the holes, push to the side and pull it out, it's just pressure fit.

Milton Baker

[orbiker]

You talking about that little white 3-hole restrictor? What did you use to remove it?

I drilled the holes larger. Works better now.

[mbaker]

Too much work, just pull it out.

Milton

[RamGunner]

There are restrictors in the head, hose, and the valve assembly. Be aware that removing the one in the valve assembly is a process. If you pull it, a hole is exposed allowing water to shoot down. A little epoxy or silicone sealant will fix that.

[Brianne1973]

We purchased a new shower head "Phoenix Air Infused". This works much better than the one supplied with the RV.