User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
Thread: Replacing roller blind
-
06-23-2019, 06:17 PM #1
- Join Date
- Mar 2018
- Location
- Phoenix AZ
- Posts
- 21
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Replacing roller blind
Sorry if this has been asked, but how the heck do I remove the blind to install a new one? The valance (344GK in back of the televator) seems almost impossible to remove. Am I missing something?
Thanks In advance,
Eric
-
06-25-2019, 04:12 AM #2
- Join Date
- Nov 2017
- Location
- Florida
- Posts
- 126
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I don’t have a 344 but the fabric wrapped valances all are installed using L Brackets at corners. They are hard to see but are in there. Roll down the blind to get a better look up to the valance dust cap.
Vivian
2018 Reflection 303rls
2018 Ford F-350 SRW Diesel
-
06-25-2019, 12:58 PM #3
- Join Date
- Nov 2017
- Location
- Florida
- Posts
- 126
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I found this link on how to install the roller shades which would help understand how to remove the clip. “To remove press the front tang of the mounting clip up and rotate the front of the rail downward releasing the shade.”
https://ascotent.com/pages/single-ro...e-installationVivian
2018 Reflection 303rls
2018 Ford F-350 SRW Diesel
-
06-27-2019, 07:32 PM #4
- Join Date
- Mar 2018
- Location
- Phoenix AZ
- Posts
- 21
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks Beachcamper, hopefully unrolling it all the way will give me enough room to push in the clips, without having to remove the wooden side valance.
380FL GFI outlets not working
Today, 03:45 PM in Electrical System and Wiring