User Tag List
Thanks: 0
Likes: 0
Results 1 to 2 of 2
Thread: MORryde CRE3000 on 2670MK?
-
06-24-2019, 12:25 PM #1
- Join Date
- Jul 2017
- Location
- Jackson, MO
- Posts
- 531
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
MORryde CRE3000 on 2670MK?
Has anyone installed the MORryde CRE3000 on their 2670MK? I have been thinking of doing this and went out and did the measurement required by MORryde qualification. One of the requirements is a minimum clearance above the tire of three inches. On the right side (kitchen slide) I only have between 2 3/4" and 2 7/8" clearance. I have no indications that the tire has ever contacted the underside of the slide and the springs still have a nice arc to them. If I remember correctly the right side of the trailer is the heavy side, plus my driveway has a slope to that side which probably doesn't help.
So if anyone has installed these on their 2670MK and has been successful please let me know. Also, what was your tire clearance measurements before installing the CRE3000?
Thanks,
DaleDale & Tammy
Retired U. S Army and Retired Helicopter Pilot
2021 Ford F-350, 6.7L Diesel, 4x4, Lariat Ultimate
2018 Grand Design Imagine 2670MK (sold)
2022 Grand Design Reflection 337RLS
-
06-24-2019, 05:36 PM #2
- Join Date
- Feb 2017
- Location
- White Bear Lake, MN
- Posts
- 1,488
- Mentioned
- 21 Post(s)
- Tagged
- 1 Thread(s)
This, and the other tread mentioned in it, may give you more information:
https://www.mygrandrv.com/forum/show...618#post1566182017 Imagine 2670MK
2012 F-150 SCrew, Eco, 4x4 6.5 box
Max. Tow, HD Payload, Airbags, ProPride hitch
(Previous: Jayco 26.5RLS Fifth, Revolution Pinbox)
Water coming from inside the...
Today, 06:18 AM in Plumbing and Water Systems