User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Antenna issues

  1. #1
    Left The Driveway
    Join Date
    Sep 2014
    Villa Ridge, MO
    0 Post(s)
    0 Thread(s)

    Antenna issues

    Hi all!
    We are not having any luck trying to use the antenna on our Reflection 29RS. Is there any secret switch that I am missing? Antenna is fully extended, red booster light is on, both televisions are in air mode but when we do the scan no channels come in. We are able to watch a dvd. Our neighbors are all getting service thru theirs and I am at a loss of what to try. Any suggestions?

  2. #2
    Setting Up Camp rvxtc42's Avatar
    Join Date
    Apr 2014
    Originally Seattle Area, Winter in Apache Junction and travel in our Solitude in the Summer!!
    0 Post(s)
    0 Thread(s)
    Where your red booster light is do you have two Coax Connectors? may have to move the Coax Cable from one to the other.
    Randy & Peggy Larson
    2014 369RL #716
    2011 Ford F-350 6.7 Powerstroke
    All of these States and Provinces in 2 years. Love our Solitude!!

  3. #3
    King Pin
    Join Date
    Feb 2014
    Blog Entries
    41 Post(s)
    1 Thread(s)
    It sounds like you might have the wrong input selected on the TV itself. Using your remote, hit "source", then select TV. Then do your channel selection. This works for my Furrion TV. Not sure which TV you have in your rig.

  4. #4
    Seasoned Camper ACDW-Ottawa's Avatar
    Join Date
    Oct 2013
    Ottawa, Canada
    0 Post(s)
    0 Thread(s)
    Definitely try those two suggestions above and here is a third suggestion. Don't forget to do a scan on your TV to find the local channels at each step (unfortunately you have to do this every time you move camp grounds). Try them in this order:
    1) check all coax connectors are tight making good contact at the wall plates
    2) Ensure the TV's are set to the correct input & Scan the channels and check reception
    3) Switch the coax at the booster to the other connector & scan the channels
    4) check all coax connectors are tight behind the wall plate (yes remove the two screws holding the wall plate). If you tightened connectors, scan the channels
    5) if still having trouble, check the connectors are tight behind the walls at the splitters and behind the booster.
    a) you might want to ask GD for help for this
    b) If you changed anything, scan the channels
    Post your solution on the forum or request more help if still having trouble.
    Aaron & Donna
    2014 Solitude 369RLS #1067
    2010 Dodge RAM 3500 SLT Mega-Cab 4x4 SRW 6.7L Cummins Diesel
    AMP Power Step Running Boards, Bed Step, & Bed Step2; Garmin RV760 GPS & EEZRV TPMS; Truck Covers USA Roll Cover
    Firestone Rear Air Suspension System, on-board compressor with 5 Gallon tank and Air port; Hijacker 16K Ultra Slider 5th Wheel Hitch, Dee Zee Truck Tailgate Assist; DU-HA Humpstor Truck Bed Storage Box; Voyager Rear Back Up Camera System
    YAKUPS® Vertical Kayak Rack and Custom Lippert 2" Receiver; Sailun S637ST tires; WeBoost Cell Phone Booster.

Similar Threads

  1. TV antenna Elevation Gear
    By webpilot in forum Electrical System and Wiring
    Replies: 2
    Last Post: 12-11-2014, 09:02 AM
  2. Two TV's on antenna at once?
    By campinfool in forum Electrical System and Wiring
    Replies: 1
    Last Post: 10-07-2014, 07:49 PM
  3. Replies: 4
    Last Post: 09-07-2014, 04:13 PM
  4. HVAC issues and multiple quality control issues
    By maverick3517 in forum General Tech Topics
    Replies: 9
    Last Post: 08-26-2014, 08:51 PM
  5. Routing antenna cable help
    By Daehawc in forum Electrical System and Wiring
    Replies: 6
    Last Post: 04-25-2014, 02:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.