User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
Thread: JT's Strong Arm Stabilizers
-
08-05-2019, 01:40 PM #1
- Join Date
- Jul 2017
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
JT's Strong Arm Stabilizers
I just purchased the JT's Strong Arm stabilizers for my Imagine 2950RL. Does anyone know of a good clear and complete video or a good set of photos showing how to install? I can't seem to find anything on YT and the illustrations in the installation manual are horrible.
Thanks for your help.
-
08-05-2019, 02:52 PM #2
- Join Date
- Jan 2019
- Location
- Twin Cities
- Posts
- 87
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Not sure of any videos, but there are plenty of us that have them installed and some decent pictures as well if you do a search. Google images might even be a good reference. I personally used the directions as a reference as to what hardware goes where and dimensions. I mounted them how I went to the frame and ended up using some of my own hardware. The directions are terrible.
2019 Chevy 3500 CC SRW Duramax
2015 Reflection 323 BHS
-
08-08-2019, 04:46 PM #3
- Join Date
- Mar 2019
- Posts
- 11
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Agreed, use the directions as a guide only. There is a video out there, sorry don't have it saved anymore, that helped when I was doing mine. Go slow! I got in a rush with my last "bolt" and ended up breaking it off.
-
08-10-2019, 08:33 AM #4
- Join Date
- Jul 2017
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks. I found an Installation Instruction manual from Happijac which is a division of Lippert on the JT's Strong Arm and it's better than what Lippert has available. It's still not the best though.
Morryde Safe-T-rail install issues
Today, 12:55 AM in Mods and DIY