User Tag List
Thanks: 0
Likes: 0
Results 1 to 5 of 5
-
08-17-2019, 09:12 PM #1
- Join Date
- Jan 2019
- Posts
- 13
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
'17 rl27 converter will not run on shore power
The converter will run when hooked up to direct 110v. But when the rig is plugged into shore power and then the converter is plugged into fuse panel "back side designated recpt" it wont run. I hooked up a drop light to the converter recpt and it lights up, but is dimmer than when plugged into regular 110v.
Note: The recept. in basement is not working at all. And yes, I have reset the fuses several times. Nothing seems to throw the fuses all the way to the off position.
?1)Low amps at fuse panel recept.?
?2)Bad fuse?Last edited by Jburnes; 08-18-2019 at 01:00 PM. Reason: Punctuation
-
08-18-2019, 03:41 PM #2
-
08-18-2019, 09:19 PM #3
- Join Date
- Jan 2019
- Posts
- 13
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
That was it! The shore wiring was the issue, as the neutral was poorly connected! Thanks for the help!!!
-
08-18-2019, 09:48 PM #4
-
08-18-2019, 10:06 PM #5
- Join Date
- Aug 2019
- Location
- Iceland
- Posts
- 8
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I wanted to advise you to check, but everything was already resolved, it's great. I hope this problem did not cause problems.
Air Springs - Couple of Questions
Today, 12:53 AM in Tow Vehicles