User Tag List
Thanks: 0
Likes: 0
Results 1 to 5 of 5
-
08-19-2019, 01:48 PM #1
- Join Date
- Jun 2019
- Posts
- 16
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Want to install a Hi pressure propane line
From the tank to the side of trailer for our Coleman grill!
Has anyone done this ? Can you tell me what you did.
-
08-19-2019, 01:58 PM #2
- Join Date
- Sep 2013
- Location
- PA
- Posts
- 4,507
- Mentioned
- 240 Post(s)
- Tagged
- 0 Thread(s)
You would have to go right off the bottle connections. The regulators are very close to the bottles.
Steve- Inventory Manager at Tom Schaeffer's RV, Shoemakersville, PA www.tomschaeffers.com
[email protected]
2011 RAM 3500 SRW Outdoorsman Edition 4X4, 6.7 Cummins--TWEAKED!
2021 Reflection 310RLS
-
08-19-2019, 02:32 PM #3
- Join Date
- Mar 2017
- Location
- Pearland, TX
- Posts
- 1,709
- Mentioned
- 15 Post(s)
- Tagged
- 0 Thread(s)
I've seen this asked before, don't know if a high pressure connection was done.
https://www.mygrandrv.com/fo...e-propane-tank
I'd expect high pressure QC/Valves and hose would be used, like in M.B. Sturgis video: https://www.youtube.com/watch?v=AAj7...ature=youtu.be
Video Comments:
:Good question. Because per ANSI Z21.41 (QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES) which is what these fittings have to be certified to, the standard will only recognize a pressure maximum of 1/2 PSIG. However, we have self certified these up to 350 PSIG and the QD valves easily handle the 350 PSIG."- Gene
Kim & Gene
2015 Reflection 317RST
2017 Ram 3500 CC LB 4x2 6.7 CTD AISIN 3.73 DRW Auto Level Rear Air, BD3, Prodigy P3, Aux Tank
-
08-28-2019, 06:09 PM #4
- Join Date
- Jun 2017
- Posts
- 52
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I did this on my last trailer
T off before regulator with rubber flex hose down to frame. Then I double flared copper tubing to run straight along frame. I had a box of swedglok 1/2” tubing laying around so I used that.
A flaring tool is like $25 I think.
Sent from my iPhone using Tapatalk
-
08-28-2019, 07:47 PM #5
- Join Date
- Jun 2019
- Posts
- 16
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thank you for the tesponses
Broken leafspring. Another….
Today, 05:26 AM in Axles, Brakes, and Suspension