User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5
  1. #1
    Setting Up Camp
    Join Date
    Jun 2019
    Posts
    16
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Want to install a Hi pressure propane line

    From the tank to the side of trailer for our Coleman grill!

    Has anyone done this ? Can you tell me what you did.

  2. #2
    Commercial Member huntr70's Avatar
    Join Date
    Sep 2013
    Location
    PA
    Posts
    4,454
    Mentioned
    230 Post(s)
    Tagged
    0 Thread(s)
    You would have to go right off the bottle connections. The regulators are very close to the bottles.
    Steve- Inventory Manager at Tom Schaeffer's RV, Shoemakersville, PA www.tomschaeffers.com
    [email protected]
    2011 RAM 3500 SRW Outdoorsman Edition 4X4, 6.7 Cummins--TWEAKED!
    2021 Reflection 310RLS

  3. #3
    Site Sponsor gbkims's Avatar
    Join Date
    Mar 2017
    Location
    Pearland, TX
    Posts
    1,709
    Mentioned
    15 Post(s)
    Tagged
    0 Thread(s)
    I've seen this asked before, don't know if a high pressure connection was done.
    https://www.mygrandrv.com/fo...e-propane-tank
    I'd expect high pressure QC/Valves and hose would be used, like in M.B. Sturgis video: https://www.youtube.com/watch?v=AAj7...ature=youtu.be
    Video Comments:
    :Good question. Because per ANSI Z21.41 (QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES) which is what these fittings have to be certified to, the standard will only recognize a pressure maximum of 1/2 PSIG. However, we have self certified these up to 350 PSIG and the QD valves easily handle the 350 PSIG."
    - Gene

    Kim & Gene
    2015 Reflection 317RST
    2017 Ram 3500 CC LB 4x2 6.7 CTD AISIN 3.73 DRW Auto Level Rear Air, BD3, Prodigy P3, Aux Tank

  4. #4
    Fireside Member
    Join Date
    Jun 2017
    Posts
    52
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by gbkims View Post
    I've seen this asked before, don't know if a high pressure connection was done.
    https://www.mygrandrv.com/fo...e-propane-tank
    I'd expect high pressure QC/Valves and hose would be used, like in M.B. Sturgis video: https://www.youtube.com/watch?v=AAj7...ature=youtu.be
    Video Comments:
    :Good question. Because per ANSI Z21.41 (QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES) which is what these fittings have to be certified to, the standard will only recognize a pressure maximum of 1/2 PSIG. However, we have self certified these up to 350 PSIG and the QD valves easily handle the 350 PSIG."
    I did this on my last trailer

    T off before regulator with rubber flex hose down to frame. Then I double flared copper tubing to run straight along frame. I had a box of swedglok 1/2” tubing laying around so I used that.
    A flaring tool is like $25 I think.



    Sent from my iPhone using Tapatalk

  5. #5
    Setting Up Camp
    Join Date
    Jun 2019
    Posts
    16
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thank you for the tesponses

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.