User Tag List
Likes: 0
Results 1 to 6 of 6
-
08-22-2019, 06:04 AM #1
- Join Date
- Apr 2019
- Posts
- 11
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
How to check/Fix USB ports in trailer
Hi!
The USB ports in our Imagine 2800bh do not seem to be working. This includes BOTH the ports on the dining room bench back and the ones in the bedroom. Has anyone ever had this problem or knows how to fix it? Thanks.
-
08-22-2019, 06:11 AM #2
Are they 12v or 120v? Have you checked all fuses and breakers? Also, have you tried using a different USB cord to ensure that it isnt your cord that is faulty? Do you notice anything else that isnt working, maybe it's all on the same circuit?
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
08-22-2019, 03:17 PM #3
- Join Date
- May 2019
- Location
- Boerne, TX
- Posts
- 324
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
If they are like mine, they are 12 volt and run off the battery. If your battery disconnect is not in the off position then it could be a fuse in the panel. Other than that, I got nuttin'.
2019 F250 Lariat
2020 Solitude S 2930RL
[SIGPIC][/SIGPIC]
-
08-23-2019, 05:48 AM #4
- Join Date
- Apr 2019
- Posts
- 11
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks so much for your reply. The cord is working in the car USB port and the fuses are fine. They aren’t working when on regular electric or the battery. The plot thickens...guess we’ll take it to the dealer. It just seems like such a small thing to drive all the way there for. Thanks for the suggestions!
-
08-23-2019, 10:17 AM #5
- Join Date
- Jul 2018
- Location
- Lehigh Valley, PA
- Posts
- 22
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I had one that didn't work. Unscrewed it from the wall and the wire to the 12v supply line had pulled out of the crimp connector. I cut off the old connector and replaced it. It ha worked since.
Ron & Dianne
2019 Reflection 337RLS
2012 Ford F-350 6.7 Diesel, SWR
-
08-23-2019, 10:23 AM #6
We had the same problem and same fix as rsinko. The wires to the USB port are very fine and are not really compatible with wire nuts.
Victron 100 amp Autotransformer...
Today, 12:14 AM in Electrical System and Wiring