User Tag List
Thanks: 0
Likes: 0
Results 1 to 7 of 7
Thread: LED lights on slide awning
-
09-05-2019, 10:54 AM #1
- Join Date
- Jan 2019
- Location
- Fulltimers
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
LED lights on slide awning
LED lights on slide awning (2019 337rls) worked initially but soon stopped working. LED lights on main awning still work. Checked wires on awning and nothing found. Any suggestions? Also LED lights under bedroom slide don't work either.
-
10-26-2020, 02:03 PM #2
- Join Date
- Jan 2020
- Location
- On The Road
- Posts
- 43
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Steve & Katey
Full time since 07/01/2022
2020 Ford F-350 DRW (5361 payload)
2024 Solitude 390RK (FBP and Morryde IS from factory)
2018 Reflection 337RLS (Still got it!)
-
10-27-2020, 06:08 AM #3
- Join Date
- Jan 2019
- Location
- Fulltimers
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
No. Been to dealer 4 times and still not fixed. Will go back 5th time in November (Lazy Days in Tampa).
-
10-27-2020, 08:17 AM #4
- Join Date
- Jan 2020
- Location
- On The Road
- Posts
- 43
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Steve & Katey
Full time since 07/01/2022
2020 Ford F-350 DRW (5361 payload)
2024 Solitude 390RK (FBP and Morryde IS from factory)
2018 Reflection 337RLS (Still got it!)
-
11-15-2020, 05:58 AM #5
- Join Date
- Oct 2017
- Location
- West Virginia and wherever I rest my head
- Posts
- 22
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
11-15-2020, 06:07 AM #6
- Join Date
- Oct 2017
- Location
- West Virginia and wherever I rest my head
- Posts
- 22
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Hello, Last year we had an issue with the slide awning not opening. Every time we would rock the switch to extend the awning a fuse would blow. After about 2 hours of scratching our heads, several blown fuses, purchase of a new amp meter, and using the camera on my phone to see how the wires ran back of the television we discovers a shiny copper wire. I pulled the stereo out and there was the cause of the blown fuses. When the factory installed the power wire to the awning, pulling the wire through a hole drilled into the wall structure, about 7 inches of the insulation was stripped off one side of the wire. As the trailer bounced along the highway the wire finally made contact with the bare aluminum framing and would blow a fuse every time we tried to open the awing. This is one of the issues GD has been made aware of that will cause an electrical failure and possible fire. When we replaced the wire, it was installed inside the plastic electrical flex tubing as added protection.
-
11-15-2020, 06:12 AM #7
- Join Date
- Oct 2017
- Location
- West Virginia and wherever I rest my head
- Posts
- 22
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Check where the wires for the awning pass into the slide. The factory may have accidently skinned the wire when pulling it through the aluminum framing since they do not use any plastic bushing at the drilled hole in the aluminum frame.
Need help with Imagine 2600 RL
Today, 10:46 AM in General Discussion