User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: Display not working

  1. #1
    New Member
    Join Date
    May 2019
    Location
    Houston
    Posts
    12
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Display not working

    Hi! Our display on the auto level control box (3.0) isnít working. Our rig was sitting for two months, thought it was battery, but now that weíve been connected to power for past week, it still isnít displaying any instructions. We were able to unhitch and auto level, but wondering what could be the problem. Disclaimer: I have no experience working with electric components!

  2. #2
    New Member
    Join Date
    Aug 2019
    Location
    Fort Deposit AL
    Posts
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I have the same problem with our LCI Leveling system. I drove 100 miles to pick up our 2019 Solitude 3740RBH from the dealership after repairs. I hooked my RV to my truck at the dealership with no one helping from the dealership and no one around. I noticed when retracting the front jacks there was no image showing on the screen. The jacks retracted with no problem and I didn't think much of the blank screen (big mistake on my part). I got home and again there was NO image on the LCI screen. The jacks worked fine but I had no clue what function I was on. I did some research and the problem may be a module issue. I'm glad it's still under warranty but now I'm 100 miles away from the dealership after just getting home!!!

  3. #3
    New Member
    Join Date
    May 2019
    Location
    Houston
    Posts
    12
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hi. I removed the cover of the module and disconnected one of the wires for 15 min and reconnected and it came back on. All fixed. I messaged lippert for the instructions.

  4. #4
    New Member
    Join Date
    Aug 2019
    Location
    Fort Deposit AL
    Posts
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Amelie.bilodeau View Post
    Hi. I removed the cover of the module and disconnected one of the wires for 15 min and reconnected and it came back on. All fixed. I messaged lippert for the instructions.
    Hi Amelie, I read on eTrailer.com to do what you did so I tried it this afternoon and it worked. My LCI image is back on. I removed the control panel from the door, unplugged the connection from the control panel for about 20 minutes and reconnected. I guess this resets the control panel.

  5. #5
    New Member
    Join Date
    May 2019
    Location
    Houston
    Posts
    12
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hi Papa John,
    Glad it resolved your issue as well!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.