New trailer. Found this bag of stuff. Can you tell me what the pieces are for?

[SJMaye]

I went to review my trailers owners manual. When I opened the bag I found a plastic bag with some parts in it. I cannot figure out what they go to. Can someone tell me?

[FT4NOW]

Number 1 looks like it goes to the shower flexible hose. Usually the hose is ran through it a foot or so above the faucet. The triangle looking pieces (un-numbered) look like a set of pieces that goes on the bottom of a set of blinds to secure it while traveling. I'm not sure what the other pieces are.

Sent from my SM-G950U using Tapatalk

[Walaby]

Number three looks like a tie down mount for dining room chairs.

No clue what the "bag o stuff" is

Mike

[SJMaye]

Thanks folks. Seems I don't need #'s 2 or 3. Number 1 is debatable. I don't think I want to screw in to the sidewall of the shower to mount that. It works fine as it is.

Thanks again for your help.

[RickLight]

Looks like a bag of spare parts to me. Stuff that either breaks a lot or came with something and isn't needed.

[Houndbb]

I went to review my trailers owners manual. When I opened the bag I found a plastic bag with some parts in it. I cannot figure out what they go to. Can someone tell me?

#2-These look like retaining clips for an appliance (stove, maybe). Unnumbered parts may be for keeping sliding doors aligned “plumb”, but maybe they are just the bottom attachments for a set of mini blinds (we just pull them up into the valance when traveling). D-ring looks like the clip for strapping down your dinette table for transit. I’m with you on the shower hose holder.

For two years I scratched my head over a nylon strap with a small (2” x 1/8” diameter maybe) wooden dowel at the end. Read everything that came with the trailer. Still no clue. Then I came here and read in the reference section the manual for our awning (which SHOULD have been included in our black pouch). Now I cannot find the strap, and it will be needed someday if our awning motor fails.
N

[Houndbb]

That was kinda fun. Anyone want to play “Whatsit?” in “off-topic”?

[huntr70]

The #2 bag is the license plate bracket bolts. They are what hold the plate to the bracket.

[SJMaye]

The #2 bag is the license plate bracket bolts. They are what hold the plate to the bracket.

Wow. Thanks. I already mounted the license plate and found it a real pain using plain old nuts and bolts. I sure wish I had these at the time.

[Keebler]

Thanks folks. Seems I don't need #'s 2 or 3. Number 1 is debatable. I don't think I want to screw in to the sidewall of the shower to mount that. It works fine as it is.

Thanks again for your help.

Mine came with #1 installed; I found it limited free movement of the shower hose and removed it.