New trailer. Found this bag of stuff. Can you tell me what the pieces are for?

[WhittleBurner]

Mine came with #1 installed; I found it limited free movement of the shower hose and removed it.

Im short so use the shower ring (#1) to hold the shower head lower so the water spray doesn't go way high and miss me .

[Keebler]

Im short so use the shower ring (#1) to hold the shower head lower so the water spray doesn't go way high and miss me .

I am struggling to visualize how the ring would secure the shower head. On mine, the shower head is secured by a mount that looks like this: https://www.amazon.com/YOO-MEE-Showe...%2C145&sr=8-10

That ring, was mounted only around the hose and offered zero support for the shower head. On mine, it only restricted hose movement, and I am tall, so I found it limiting and took it off. May be a height thing!

[WhittleBurner]

I didn't sat it held it straught or good..
Thought about adding another thing to hang it in but this seems to work and no additional holes drilled in the shower. Our ring was installed b4 we took possesion

[Houndbb]

The #2 bag is the license plate bracket bolts. They are what hold the plate to the bracket.

Interesting....so, I guess our “special” 2150, with the U dinette, and the drop down table isn’t special enough to rate those licenses plate clips-we’ve got bolts with square nuts. As SJ said, PIA!
N

[Houndbb]

I am struggling to visualize how the ring would secure the shower head. On mine, the shower head is secured by a mount that looks like this: https://www.amazon.com/YOO-MEE-Showe...%2C145&sr=8-10

That ring, was mounted only around the hose and offered zero support for the shower head. On mine, it only restricted hose movement, and I am tall, so I found it limiting and took it off. May be a height thing!

Ah...Marcy found a use for it that wasn’t intended! I can see it-feed the hand hold portion through the ring, the head won’t fit. Probably would shoot water at the torso of a tall person. Ours was in the bathroom drawer, along with the TP roll holder. So I’ve yet to see where they intended for it to be installed. I will testify that the hose, if long enough, can catch on faucets, shelves, other things you’ve installed in the shower and either knock them off the wall or yank the shower head out of your hand.
N

[huntr70]

Interesting....so, I guess our “special” 2150, with the U dinette, and the drop down table isn’t special enough to rate those licenses plate clips-we’ve got bolts with square nuts. As SJ said, PIA!
N

Typically, they are only with the Solitude's.

I've never seen them come in with an Imagine or Reflection.

[[email protected]]

I would install number 1. It goes about 6" above the faucet handles and when you the shower head in your hand it keeps the flex line from putting sideways pressure on the plastic threads that thread into the water valve handle.

[Dick Noble]

In our Solitude, #1 held the shower hose against the wall. Have no idea why. When we changed shower heads I took it off and sealed the holes.

[DAFIXA]

#2 is a single brass knuckle!

[BuddyLovesCamping]

That reminds me, we found a couple bags of what looks like fake rocks or "ice" chips and have no idea what they're for. We're thinking maybe they go in the fireplace -- you know, that "fire and ice" motif perhaps? But if so, we have no idea how or where to put them. The fireplace came with the fake burning logs insert.