User Tag List
Results 11 to 20 of 28
-
10-30-2019, 12:09 PM #11
- Join Date
- Sep 2019
- Posts
- 14
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
-
10-31-2019, 08:33 AM #12
After see what is involved with winterizing a neighbor's Reflection, I realize one of the upsale points from Imagine to Reflection is the winterizing process. All of his valves are right there on the front of the panel, not hidden about the camper like on mine.
2019 2970RL
2020 F250
-
10-31-2019, 09:24 AM #13
- Join Date
- Jul 2016
- Location
- Henrietta, NY
- Posts
- 719
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
As a side note - I "T'd" off the drain line, extended the winterization line down through the mouse hole, and ran it to the T on the drain line. With the valve set to "winterize" it draws off the bottom of the tank, netting me another 6 gallons when dry camping. Adding a shut off valve to the overflow and filling the tank through the gravity port got me another 5-6 gallons.
2019 F-250 Supercab
2017 Imagine 2650RK
-
11-06-2019, 02:51 PM #14
- Join Date
- Aug 2017
- Posts
- 23
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
-
11-06-2019, 03:27 PM #15
- Join Date
- Jun 2019
- Location
- Long island , NY
- Posts
- 28
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Did you see that 2 quarts of water stays in the HW heater after it is drained. Manufacturer says that is ok for freezing but I stuck a 1/4 tube in there and siphoned it out.
-
11-06-2019, 03:35 PM #16
- Join Date
- Jul 2019
- Location
- WA State
- Posts
- 23
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Agree with the stupid decision to bury the pick up hose behind a panel with 8 screws, 3 of which in mine didn’t even hit wood when it was built.
-
11-06-2019, 04:03 PM #17
- Join Date
- Jun 2019
- Location
- Upstate Eastern NY
- Posts
- 22
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
11-06-2019, 04:13 PM #18
- Join Date
- Oct 2019
- Posts
- 8
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Winterization hose connector too large to fit into antifreeze container.
This was my first time to winterize a GD Imagine 2450RL. No trouble finding the winterization hose but I was surprised to find the connector on the end would not fit into the gal. antifreeze container. Guess I'll make up an adaptor hose that will screw into the connector. This time, I cut a larger hole in the antifreeze container, but that ruins the container for storing extra antifreeze.
-
11-07-2019, 03:56 AM #19
- Join Date
- Jun 2019
- Location
- Hendersonville, TN
- Posts
- 195
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
-
11-07-2019, 03:57 AM #20
- Join Date
- Jun 2019
- Location
- Hendersonville, TN
- Posts
- 195
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
Charging Lithium Batteries From...
Today, 12:46 PM in Electrical System and Wiring