310GK + F350 DRW + Reese Goosebox: Looking for more details

[orbsah]

Hi - I've been using the search function and can't seem to find what I'm looking for. As the title suggests, I'm looking for these specific part/model numbers for the combination above:

Reese Goosebox, 20K, gen 2: Part number______?
Goose ball set: Part number_______?
Chain set: Part number_______?

Anything else I need?

I'm trying to price out the entire system. Thanks!

[gengiant]

My 2019 310gk has 12- inch pin box. As such, the part number for the 20,000# gen 2 goose box was #94623 (according to the receipt from my dealer). The cost of the goosebox directly from Reese was $1,300.

I got the Reese safety chains part #RP49151. It has rather large Cleve’s hooks for which I needed the Reese safety chain loops #RP58468. All these came from etrailer.com. I already had the turnover ball (OEM Ford), otherwise etrailer.com had advised to purchase the complete kit #RP30137.

Good luck!


Sent from my iPhone using Tapatalk

[orbsah]

Thank you so much! I appreciate the info.

[geotex1]

2nd Gen 20K Goosebox = $1298 delivered from eBay seller. That seller simply sold product from Keystone. Delivery via LTL freight in 2 business days.

Reese chain kit for the 20K unit = $45 shipped from different eBay seller. Also came from Keystone.

I have a RAM with factory puck system and run a B&W goose ball set. The chain clevis size fits the B&W holds perfectly! I'm pretty sure B&W makes a set for Fords with the factory pucks. I bought my set a few years ago for $250, but believe they're a bit more now.

[orbsah]

Thanks for the info!

[Sowbug]

I’m looking for the same setup: 2019 F350 DRW LB and 2nd generation 20k goosebox for
a Solitude 310 gk that will be delivered in a month.

I was told the Reese part number was 94720 from the manufacturer for Reese (Horizon Global). I’m going with the B&W gooseneck kit ($299). I’m a little concerned the goosebox part number does not match the one from the post above. Maybe I’m missing something.

Do the chains not come with the goosebox?


Sent from my iPhone using Tapatalk

[orbsah]

I got this from Reese tech support ....

94720 is the 20K Goose box for replacing Lippert Components pin boxes.

30137 is the service kit for goose neck ball, safety chain mounts, and cover.

49151 safety chain kit.

[Sowbug]

One consideration for the Reese goose ball kit is that it is a little lower than the B&W kit. The higher ball on the B&W may provide additional clearance above the truck bed rails according to my research. I have a 2019 F350 that sits high snd the bed is deep.


Sent from my iPhone using Tapatalk

[orbsah]

I think I read that too. Thanks!

[geotex1]

Yes, the B&W goose ball will give you about 1.15" additional height over the Reese goose ball. I measured both in my RAM when I was deciding which to buy a few years ago. FWIW, I have 9" of rail clearance with my Solitude with the Goosebox and B&W ball on my RAM, but I'm also nose high on the camper right now. I'm leaving it this way for now since we're still moving into the big 5er from a TT and plan on adding a washer and dryer in the Spring. However, I will probably need to raise the Goosebox in the mounting wings one more set of bolt holes to level out, which should put clearance at 7.75". FWIWx2, with the Goosebox and long bed, full 90 degree is no problem at all.