User Tag List
Likes: 0
Results 11 to 17 of 17
-
11-14-2019, 09:54 PM #11
- Join Date
- May 2018
- Posts
- 57
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
We typically carry 4 mountain bikes and just gear. Way underutilized, I know. [emoji846]. We bought the toyhauler more for the flexibility of the space with teenage children.
Sent from my SM-N960U using Tapatalk
-
11-20-2019, 05:20 PM #12
- Join Date
- Jul 2019
- Location
- Lake Wabaunsee, KS
- Posts
- 12
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
We have a 2017 Imagine 2650RK with Schwintek on both the small and large slides. The only Schwintek malfunction we've had was operator-error when an object was trapped and caused the slide to jam. We were not able to fix it ourselves and had to take it to the dealer. Note - the Schwintek system DOES require periodic lubrication at the motors, not the rail. There is a very good You Tube video from Schwintek to give guidance on the lubrication procedure.
-
11-20-2019, 07:47 PM #13
- Join Date
- Jun 2019
- Location
- Colroado
- Posts
- 73
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
I have the 320G and hauled my Polaris 800 2 seater RZR to Moab and back with no issues. I did weigh the entire rig and it came in at 24,940 pounds. The truck itself weighed in at 9,220 pounds, yes I unhooked the camper and weighed the truck. So the pin weight was 2,360 pounds making the axel weight at 13,360 pounds. This only leaves 640 pounds left on the axels and 1,080 pounds total left, GCW for trailer is 16,800 pounds.
I only had about 30 gallons of freshwater, full Lp tanks, about 15 gallons of gas in trailer tank probably around 1500 pounds or gear, clothes and beer.Last edited by mostad; 11-20-2019 at 07:50 PM.
2021 F350 CC LB
DW, diesel, 4x4
2020 Momentum 320G
-
11-21-2019, 02:02 PM #14
- Join Date
- May 2019
- Location
- Cary IL
- Posts
- 10
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
schwintek motor
I had to replace 1 if my motors on my imagine dinette/sofa slide. Out of warranty, not the easiest of repairs but possible and cheaper then a dealer. Mine seized up on the motor shaft due to our lack of use I'm sure, we didn't use our unit for several months. I advise you to lubricate as advised by schwintek and run it in and out if you don't use your camper often.
-
11-21-2019, 03:47 PM #15
- Join Date
- May 2018
- Location
- Dalton, MA
- Posts
- 163
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Button down is the key, otherwise motors can come out of sync, also use a good quality silicone on tracks seals
-
07-20-2023, 12:22 PM #16
- Join Date
- Jun 2020
- Location
- Aubrey,Texas
- Posts
- 14
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Our imagine 2670 has a schwintek slide for the kitchen. We had it fixed a month ago to the tune of $3k. Just tried it to be sure it worked and it went out about 2/3 and stopped. Won't go either way now. Help
-
07-20-2023, 03:24 PM #17
Freezer Opens on Travel Day?
Today, 03:46 PM in Appliances