Installing a Splendide 2100XC in my (about to be delivered) GD315RLTS

[Rockhound 7]

I am going to move my Splendide 2100XC combo washer/dryer from my Class A to my new (to me) Reflection 315RLTS. It has the w/d prep but has not had a unit installed before. Anyone who has done this, do you have any tips, suggestions, or "don't do this" advice?

Thanks in advance,

Jerry

[Fl2GaScotts]

https://www.mygrandrv.com/forum/show...ghlight=Washer

Not sure if this will help

[Rockhound 7]

Wow that's a very complete write up.Thank you.

You didn't leave much doubt about what you did. Good road map for the rest of us.

Since I have the combo washer/dryer and that goes on the left side, is the dryer vent hole already drilled on that side or will I need to drill it there too. My unit should arrive sometime next week and would like to get the w/d installed asap. It's coming out of my Class A on Friday. Should be all caught up on the laundry by then.

https://www.mygrandrv.com/forum/show...ghlight=Washer

Not sure if this will help